In case of hemt using silvaco tcad how to specify interlayer charges
Can anyone give suggestion on how to write silvaco tcad code for load pull measurement?
25 August 2023 9,226 0 View
I am simulating a sigma delta ADC in Cadence. Now I need to plot the spectrum for the output of the ADC in the MATLAB.
01 June 2022 6,955 0 View
Information on humic acid from cow dung.
25 March 2019 3,979 4 View
any methods to reduce NH4OAc background for IC analysis? or any alternate soil extraction procedures available for cation analysis with IC in order to determine CEC?
24 March 2019 6,834 6 View
In a set of nitrification of black wastewater experiments, nitrate formation took place despite low levels of alkalinity (lower than 7.14 mg alkainity per mg of NH4-N oxidised. what could be the...
06 October 2018 7,247 9 View
Chromium requirement in sheep is needed to plan an experiment in sheep by supplementing it. Kindly inform if any scientist conducted experiment in sheep by supplementing Chromium element.
02 April 2018 7,589 4 View
As i have to improve mutton production from local ram lambs by feeding locally available feeds. Kindly inform latest techniques, if any to hasten the growth in sheep.
26 March 2018 330 7 View
Conducting a growth trial in LYW cross piglets. Facilities are not available to collect total feces from each animal. therefore , anybody kindly inform the procedure for estimation of nutrient...
23 March 2018 7,207 4 View
What changes does evaporation losses cause in organic and inorganic concentrations of aerobic reactor?
11 January 2018 520 7 View
I need to analyse Monod kinetics for nitrogen removal from wastewater. Can anyone provide me with alternative biomass estimation methods( instead of VSS)?
30 July 2017 9,255 6 View
Hello, I'm newbie to TCAD. I wanna calculate Breakdown Voltage of AlGaN/GaN HEMT. But, my code shows just saturation. Could you please help me how to simulate Breakdown Voltage of my code? And...
25 July 2024 3,738 1 View
Currently, I have created a gate-all-around process using sentaurus tcad and I am trying to measure the noise using the cmos noise code. However, an error occurred during the simulation. The error...
24 July 2024 6,352 0 View
The material is SiGe
03 July 2024 1,374 0 View
Hi everyone hope your all doing good. I’ve been looping my scripts and am trying to take a cut line of the conduction band energy with respect to y for each loop. Basically, I want to take a...
03 July 2024 9,134 1 View
I'm trying to use this novel material (LaZrO2) as a gate oxide in SOI using 'user.material' syntax but getting an error
28 June 2024 3,150 1 View
I want to add new mobility model which is not in Sentaurus TCAD .
26 June 2024 9,991 0 View
I can understand that we can use Sentaurus TCAD for designing neuron and synapse. But to implement full crossbar architecture using these neuron and synapse for image classification application,...
16 June 2024 6,879 0 View
Figure 1 is my plot, the background will be colored when the quantity is set to electron concentration. While Figure 2 is the figure i want. How to set the background to white color when the...
11 June 2024 8,621 1 View
I want curve in paper file.But the result of my simulation is that the current is negative, I don't know why?After I tried to change the drain voltage to positive, the curve was right, but it...
08 June 2024 5,351 3 View
I saw an article about using positive charge and negative charge instead of C-H dipole to build internal potential to imitate 2DHG, but my imitation result is not satisfactory, please ask me how...
04 June 2024 8,385 0 View