what are factors should be considered before the tensile and flexural testing of fibre reinforced composite samples.
hi,
Fibre composition in the composite, fibre/matrix bonding, chemical treatments and surface modification of fibres, fibre orientation/layup, type of matrix are the factors influences the tensile and flexural testings of fibre reinforced composites.
The factors include chemical treatment, fibre content, a form of fibre, bonding between matrix and fibre, as well as water absorption
In addition to above fibre aspect ratio also play an important role in these properties.
What are the advantages and applications of this method
01 February 2018 7,417 0 View
Harmful health effects of using nano-material. What are the precautions should be taken ?
31 December 2017 6,891 8 View
Can anyone explain the valid application of Nano-composites for the present and future
31 December 2017 7,815 0 View
Any problems with development of graphene composites.
31 December 2017 8,593 0 View
What are the effective diet foods for reducing fatty liver disease stage 2. Let me know about the other effective medications.
11 December 2017 913 0 View
Dr. Peter Glidden cites a study published in the Journal of Clinical Oncology, which found that over a 12-year period, chemotherapy did not cure adult cancer 97% of the time. Is it related to...
11 December 2017 2,113 6 View
Any type of defects and cracks. Which method gives accurate results in case of polymer matrix composites. Is any disadvantages using over the material.
11 December 2017 6,380 4 View
Any newer methods which reduces the water absorption property of bio-fibres? Whether it will succeeds in the hydrophilic nature of the fibres One of my aim is to find a proper solution, as we...
10 November 2017 5,483 5 View
My name is Linto George Thomas. I completed my master of technology in manufacturing engineering , from Manipal University, India. I have a curious mind with great inquisitiveness to study for a...
10 November 2017 5,865 3 View
All altruists ... During Master thesis.. I have done all the experimental part alone and wrote two full length journals and corrections did my professors . Intial ideas me and my professor sit...
10 November 2017 3,184 26 View
effect of double bond on the flexibility of polymers
07 April 2021 0 0 View
I am writing to request some information for making polymer color flakes. I would appreciate the help.
17 March 2021 0 0 View
I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...
03 March 2021 7,540 4 View
The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...
03 March 2021 4,107 4 View
Question to you and THEM, the New Journal, "Integrative Psychological and Behavioral Science" -- do you not know, and have you not seen, this done before? There appears to be a core problem for...
02 March 2021 3,024 2 View
02 March 2021 7,082 3 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
Hi. I am doing non linear FE analysis using a new material beam under flexural 2 point loading using ANSYS. I have defined a bilinear material model. The solution has converged. In results I am...
01 March 2021 9,911 3 View
I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...
01 March 2021 6,661 3 View