Please mention the most efficient way with easily available precursers.
The method is quite simple actually, start with melamine and dissolve in ethylene glycol, add HNO3 as polymerizing agent, filter and dry the product and then calcinate it in air at 400-500 C. you will get carbon nitride
Please refer to following papers for details
https://www.researchgate.net/publication/259392599_Multifunctional_g-C3N4_Nanofibers_A_Template-Free_Fabrication_and_Enhanced_Optical_Electrochemical_and_Photocatalyst_Properties?ev=prf_pub
https://www.researchgate.net/publication/277713221_One_Dimensional_Graphitic_Carbon_Nitrides_as_Effective_Metal-Free_Oxygen_Reduction_Catalysts?ev=prf_pub
Good Luck
Article Multifunctional g-C3N4 Nanofibers: A Template-Free Fabricati...
Article One Dimensional Graphitic Carbon Nitrides as Effective Metal...
I would suggest the same answer of Dr. Faheem K. Butt .
Best regards,
Mostafa
I want to separate a stream of liquid and a stream of gas for an experiment. It is best suitable when the material is permeable to gases but impermeable to the liquid. Your valuable suggestions...
10 November 2019 6,467 3 View
Apart from the experimental part (where an additional problem of radiolysis (ion generation) in presence of electron beam is there) what other problems (like multiple scattering) might one face in...
10 November 2019 7,654 1 View
06 July 2017 5,205 0 View
Especially how do I interpret 2-D electronic spectra? What do the absorption and emission axes signify?
04 May 2017 3,049 2 View
Quantum mechanical description will help.
11 December 2016 2,385 0 View
It is okay even if I have to warm up the solvent a bit.
09 October 2016 4,449 3 View
Also if there are any interesting study on photonic crystals please provide the links.
08 September 2016 4,597 0 View
What does this relative intensity correspond to?
04 May 2016 3,790 6 View
Procedure should involve easily available chemicals in the lab.
02 March 2016 7,098 1 View
Please provide me with an easy procedure.
02 March 2016 8,744 0 View
I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...
03 March 2021 7,540 4 View
We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...
03 March 2021 7,975 3 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...
01 March 2021 2,207 3 View
How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...
28 February 2021 7,397 8 View
Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...
26 February 2021 10,014 3 View
During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...
25 February 2021 7,994 3 View
Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...
25 February 2021 3,292 3 View
Respected Professor's i hope you are doing well and happy. i need some information about carbon Nanotubes. before blending the CNT with the matrix the CNT has been introducing in some treatments....
24 February 2021 5,383 5 View