How to isolate a single 2-D layer of carbon nitride from bulk graphitic carbon nitride?
These references may be helpful: http://onlinelibrary.wiley.com/doi/10.1002/adma.201204453/full
http://pubs.rsc.org/en/content/articlelanding/2013/ta/c3ta13188b#!divAbstract
You might want to try a mangesiothermic denitriding process. This helps to exfoliate the obtained g-C3N4 into thin sheets. It’s a long process and the working temperature is as high as 750oC in a tube furnace. Contact for details.
I want to separate a stream of liquid and a stream of gas for an experiment. It is best suitable when the material is permeable to gases but impermeable to the liquid. Your valuable suggestions...
10 November 2019 6,467 3 View
Apart from the experimental part (where an additional problem of radiolysis (ion generation) in presence of electron beam is there) what other problems (like multiple scattering) might one face in...
10 November 2019 7,654 1 View
06 July 2017 5,205 0 View
Especially how do I interpret 2-D electronic spectra? What do the absorption and emission axes signify?
04 May 2017 3,049 2 View
Quantum mechanical description will help.
11 December 2016 2,385 0 View
It is okay even if I have to warm up the solvent a bit.
09 October 2016 4,449 3 View
Also if there are any interesting study on photonic crystals please provide the links.
08 September 2016 4,597 0 View
What does this relative intensity correspond to?
04 May 2016 3,790 6 View
Procedure should involve easily available chemicals in the lab.
02 March 2016 7,098 1 View
Please provide me with an easy procedure.
02 March 2016 8,744 0 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...
01 March 2021 2,207 3 View
Nanotechnology in concrete materials
01 March 2021 3,379 3 View
I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...
28 February 2021 298 3 View
Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...
26 February 2021 10,014 3 View
During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...
25 February 2021 7,994 3 View
Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...
25 February 2021 3,292 3 View
Respected Professor's i hope you are doing well and happy. i need some information about carbon Nanotubes. before blending the CNT with the matrix the CNT has been introducing in some treatments....
24 February 2021 5,383 5 View
Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...
24 February 2021 3,785 3 View