How do you usually set the parameters when using ultrasonic treatment (such as cell disruption, sample dispersion, etc.)?
For example, is there an optimization plan for power, time, temperature control, pulse mode, etc.?
Do you need to adjust the conditions in different experimental scenarios (such as protein extraction, nanomaterial preparation)?
[Troubleshooting Questions are selected from MCE customer consultation emails.]
Ultrasonic instrument:
ultrasonic cleaning instrument is used;
Ultrasonic parameters:
frequency is set to 20-40 kHz, temperature is controlled at 37℃;
Operation process:
single ultrasonic treatment for 1-3 minutes, repeat the operation according to the state of the solution until the solution is completely clear.
The answer to this question comes from MedChemExpress (MCE) Technical Support.
How to contact us?
Tel: 609-228-6898
Fax: 609-228-5909
E-mail: [email protected]
Technical Support: [email protected]
Address: 1 Deer Park Dr, Suite F, Monmouth Junction, NJ 08852, USA
Lucian Miles Take a look at this webinar (free registration required):
Ultrasound, cavitation, and the singing kettle
https://www.malvernpanalytical.com/en/learn/events-and-training/webinars/W130619UltrasoundCavitationSingingKettle.html
- Badges
- Science topic
- Similar topics
- Chemistry, Organic
- Organic