How to use protein A G beads to purify antibody?

Secretory universal influenza antibody CR9114 were successfully expressed by adenovirus vector ,then we used protein A G beads purify CR9114.But the molecular weight of the purified antibody under...

22 February 2021 4,318 2 View

Amorphous silica XRD peak at around 10 degree?

21 February 2021 3,417 5 View

How could I get the P-value from the mean, SEM, and n of different groups in the t-test?

How could I get the P-value from the mean, SEM, and n of different groups in the t-test without the original data? For detail, I would like to know the P-value between BMP-2: 50ng/ml group and the...

06 February 2021 6,539 4 View

What mechanism is involved when chitosan is coated on magnetic nanoparticles?

Hello! I am currently working on coating of chitosan on magnetic Fe3O4 nanoparticles. I am wondering how this coating process happened? i.e. through what mechanism that chitosan can be coated on...

13 January 2021 5,657 5 View

What are the best paid maths journals?

Do they accept everything or they still pass them on a sieve?

12 January 2021 3,515 15 View

If The Star Sirius Was Described As Red In Historical Times, Why Is It White Now?

Several classical age writers described Sirius as red or reddish or more red than Mars, along with other red and orange stars that are still the same colors described in the past. Sirius has...

05 January 2021 1,080 2 View

Can Anything Pass From One Universe To Another?

Roger Penrose in the book Cycles Of Time requires all mass and energy to be converted to electromagnetic radiation. This is the sequential end of time in an old universe 3D not 4D and the setting...

02 January 2021 9,086 3 View

Does The Ending Of An Old Universe Cause The Beginning Of A New Universe?

Roger Penrose has promoted his book Cycles Of Time as an alternative view of Universe early beginnings. Along with other researchers he finds faint circles of temperature variations in the CMB...

02 January 2021 7,251 4 View

The impact of different poisson's ratios when analysising field vibration?

The Poisson's ratio of soil is quite difficult for us geo-engineers to obtain. I came across a problem when I tried to determine the parameters in a FEM model. For the saturated clay in...

02 January 2021 8,971 3 View

Is it possible to deposition a large area dielectric layer(mm scale) on the wet transferred graphene?

I want to deposition a dielectric layer on top of the CVD wet transferred graphene. The purpose of the dielectric layer is to uniformly cover the graphene and enable the top-gate modification of...

14 December 2020 7,693 2 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

How to remove fatty material from plant extract?

The resultant solid was partitioned three times with 250 ml of petroleum ether (40-60/c) to remove any fatty material and evaporated to dryness.

28 February 2021 9,464 2 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How to prepare a thin polymer film by post-polymerization/crosslinking?

24 February 2021 2,362 5 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

How to improve the adhesion between germanium and silicon monoxide thin film layers using EBEAM evaporation?

I want to deposit multilayer coating of germanium and silicon monoxide on silicon wafer using ebeam evaporation?

21 February 2021 2,141 3 View

How to define the sink temperature and film coefficient?

Hi, everyone. I am considering the heat conviction during compacting simulation by Abaqus. I was wondering that how to define the sink temperature and film coefficient? Is there any references...

21 February 2021 6,197 1 View

No title

The regenerated cellulose film was prepared by zinc chloride/H2O system. The zinc chloride had been washed away in the regeneration process, and the wet film which was not dried had uniform...

18 February 2021 9,538 1 View