Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

What are the application of Fixed points thoery in Chemistry.?

It is said that fixed point theory has lot of applications not in the field of mathematics only but also in various areas. So I am looking for applications in Chemistry only..

26 February 2021 3,533 1 View

What is the molecular size for crystal violet and reactive orange 16?

I am using methyl violet 10B and reactive orange 16 (RO16) dyes for my Ph.D. research. I'm trying to find the molecular size for both of these dyes. It is possible for me to find these dyes'...

01 February 2021 3,333 4 View

How to find the target displacement to use in displacement control pushover analysis according to ASCE 41-17?

I am performing pushover analysis in Etabs of a steel braced frame but oI do not know what value should I use for target displacement. The height of the building is 20m. I want to know what value...

29 January 2021 2,190 2 View

Can we coat the pellet with graphite spray in place of silver paste for making electrical contact to measure the thermoelectric properties?

I want to coat the pellet because without electrical contact (may be due to the high resistance of the pellet), the V-I plot is not coming in the ZEM-3 instrument. I want to measure electrical...

24 January 2021 836 2 View

What is suitable etching resist coating for polished Titanium Grade 5 surface?

Currently we start a chemical etching project. This project involved etching a polished titanium grade 5 surface part. We facing a problem where by our etch resist coating peel off during etching...

15 January 2021 1,592 3 View

No title

13 January 2021 2,487 1 View

Variant or strain, what exactly happened to the corona virus ?

The new, more contagious variant of the virus that causes COVID-19 which initially detected in the U.K. and has now been spotted in many of the country. While some have referred to this as a new...

11 January 2021 8,810 5 View

How many times can we immunize mice before hybridoma preparation?

Dear all, Recently I have been working with monoclonal antibody production and I usually Immunize mice for a total of 4 times with the last one being diluted in PBS 3days before fusion...

09 January 2021 9,320 3 View

The hospitals reported rise in ICU admissions of young COVID patients - Is the new strain of COVID to be blamed?

05 January 2021 3,141 12 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Why Austenite grains in steel show much more twinning than ferrite grains?

It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...

02 March 2021 728 2 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

I need to accelerate corrosion in steel parts that are used in a salt-water environment. Is there a technique for doing so?

I have a structure that employs d-ring swiveling tie-downs that corrode during use and become "frozen". I have sample swivel assemblies that I wish to corrode to see if I can free them using one...

01 March 2021 3,739 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

What kind of steel moulds are used for hot pressing metal powders?

My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...

22 February 2021 2,965 4 View

What are effects of steel jacketing on flexural strength?

Dear all, If steel jacketing is used to retrofit a reinforced-concrete (RC) column, can we use it to improve flexural strength? I understand that we leave gaps between the ends of the jacket and...

22 February 2021 1,906 5 View

How to model steel jackets using SeismoStruct?

Hi all, Does SeismoStruct support modeling rectangular RC columns retrofitted with steel jackets (e.g. rectangular, elliptical) ? Any suggestions for other software (apart from...

20 February 2021 4,521 1 View

Thermal and mechanical properties of concrete and steel after cooling?

How do the thermal conductivity, specific heat capacity, plastic strain, critical compressive displacement, and thermal expansion of both hot-rolled steel and concrete change after cooling based...

15 February 2021 1,385 5 View