Is IMPACT FACTOR justified in case of Taxonomy?

There is huge pressure of getting good impact factor on scholars now a days. On the other hand Taxonomy is a very dry subject and the concerned papers can only get citation in same group of organism.

26 February 2021 5,851 1 View

Can a Golgi-stained dendritic spines picture processed by Image J be directly used for publication?

24 February 2021 3,348 2 View

What reference do you recommend about doublet lattice method (DLM) coupling with finite element method (FEM) ?

I want to write a code related to the flutter of aeroelastic wing under unsteady load using doublet lattice method (DLM). I want a good reference with numerical examples or a book which learn me...

25 January 2021 7,488 3 View

Where can I find these two papers?

14 January 2021 1,572 3 View

After CRISPR and single-colony picking, cells reverted to WT?

Hi guys: I have been doing CRISPR knock-in and knock-out and one seemingly impossible scenario keeps happening. In the CRISPR knock-in attempt I tried to add a tag on a gene of interest, so I...

07 January 2021 190 3 View

What if another author with same name as yours mention your article with his name?

" Psychosocial Issues among Breast Cancer Patients in Asian Developing Countries" is my article but another Sajid Iqbal has added it to his profile on research gate, how can we let him know his...

29 December 2020 5,736 4 View

Which is better to focus on teaching or research for a good academic life and Why?

Which is better to focus on teaching or research for For a good academic life and Why?

26 December 2020 5,737 9 View

Calculation the Pump power needed in a pressurized flow system?

Hi all, I am design now a liquid high pressure flow system to be used up to 50 bar, and I am having some doubts concerning how I can estimate the pump power. Besides the pressure drop in the...

15 December 2020 8,411 1 View

Design of a membrane system to remove CO2 from a flue gas current?

Hi all, I am trying to design a membrane system to remove the CO2 from a flue gas current, and I am having difficulties in finding information. Does anyone have any technical information,...

15 December 2020 3,655 2 View

Is there any ingredient I an add into formula to slow down gas generation from Vitamin C?

I know Vitamin C is unstable and tends to be oxidized quickly. The problem here is I made a Vitamin C beverage at pH 4-5, and it starts to generate gas in the packaging, especially at high...

13 December 2020 6,055 1 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Glass fiber content in a gypsum board ?

Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !

01 March 2021 2,501 3 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

How can we limit artifacts caused by rotation in fiber photometry?

We are trying to run fiber photometry experiments for long time scales, but we get these sinusoidal artifacts that come up. We think they may be caused by twisting of the fiber optic subject...

25 February 2021 568 1 View

How to properly calculate Interfacial area density in a porous domain?which are possible value for glass fiber?

I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...

23 February 2021 6,043 1 View

How can we add reinforced thermoplastics with granules in injection molding machine?

I need to make an injection molding machine in which short fibers are to be introduced. Short fiber length and material properties are to be determined and also the material strength are to be...

22 February 2021 4,290 1 View

Staining methods for skeletal muscle fiber typing?

does anyone know the best method to differentiate and quantify rapid fatiguing and fatigue resistant muscle fibers? the old method form the 1980's uses ATP staining which is quite labor intense?

21 February 2021 6,483 3 View

Aspen Plus Error: Unknown or undefined bead number?

Hello, in my Aspen Plus Simulation (see attachment) there are two heat exchangers. One HEX1 (oil+gas) ist fed by hot gas which ist coming out of a burner. The other HEX2 (gas+gas) shall work as a...

14 February 2021 8,096 2 View

Why the storage moduli E' decrease with highr fiber volume?

Hi guys, I am facing problems to interpret a DMA results. Material: Composite Bisphenol A + curaua fiber What is being tested: the influence of fiber volume on the composites properties...

12 February 2021 174 7 View

Is this 6GHz wifi antenna create complexity at the time of febrication?

I have design a 6GHz antenna for wifi.The feed line width is 2mm and there are 2 parasitic elements beside this feed line with 1 mm gap.Is there any problem at the time of febrication?

04 February 2021 9,241 3 View