Reduction Potential of citrate

More Kalyan Sadhu's questions See All

I want to simulate a system containing protein and heavy metals; which force field is most reliable for this purpose?

The protein I want to simulate has multiple heavy metals. I wanted to know which force-field I should use with GROMACS to achieve this. Most importantly, do the latest updates in the force-field...

16 February 2021 2,420 1 View

Under what conditions absorption and excitation spectra of a same species can be different?

I took absorption and excitation spectra of a same species in the same solvent. Ideally I should get the excitation spectra almost similar to the absorbance spectra. But I got the excitation...

13 December 2020 8,965 2 View

How to create a Voltage Heat Map of distribution network?

I am trying to create a voltage heat map of a distribution network in Matlab/Python. I have the values of bus voltage magnitude and angle but cannot plot them in a heat map. The objective is to...

02 November 2020 3,561 6 View

Measurement of Gain of a CP antenna?

How do I measure the gain of CP antenna inside an anachoic chamber? What should be the reference antenna, I mean it should be LP or CP? What is the procedure of measurement?

17 November 2019 336 6 View

How to obtain the sputtering yield of different species in Quaternary sputtering target?

we have prepared the CZTS thin films using single target in RF sputtering. which formula should i use to obtain the sputtering yield of different atoms such as Cu, Sn, Zn . is it possible to get...

15 October 2019 1,699 6 View

How to extend conference paper into journal paper?

I would like to know , what are the possible ways to extend conference paper into journal paper? My work is in the area of natural language processing

22 September 2019 1,246 3 View

How to obtain the crystallinity and strain in the thin film using RAMAN shift?

we have deposited the semiconducting thin film (CZTS) using sputtering. is it possible to obtain the crystallanity and strain in thin film using RAMAN spectra? which formula should i use for that?

09 September 2019 8,088 1 View

Is it possible to get different RAMAN shifts for the same sample deposited by different process parameters?

I have deposited CZTS by RF sputtering at different temperatures, pressures and powers. In RAMAN analysis i am getting peaks at 334,337,330 cm-1 is it possible to observe these kind of shifts due...

04 September 2019 5,898 2 View

What is miniaturization of Antenna?

How we will calculate the miniaturization of antenna? What are the parameters are to be consider to calculate the miniaturization? Is there any proper formula?

13 August 2019 7,475 6 View

I unable to enter the DIPPR parameters for liquid heat capacity of a component in Aspen Plus although parameters for TDE and other eqn can be entered?

Aspen Plus provides the option to input the T dependent liquid heat capacity parameters. Although the option exists for entering parameters for following equations: IKCAPE TDE ThermoML Barin But...

05 July 2019 8,889 1 View

What is the indication of the absence of peaks in Methanol electrooxidation CV curves ?

I have several question regarding the MOR; hope anyone help me better understand. 1- in CV using (KOH+MEOH) what is the indication of absence of the redox peaks? shouldn't they exist as a sign...

28 February 2021 4,851 8 View

Does RNAiMAX transfection reagent work in serum free medium?

I diluted siRNA and RNAiMAX in opti-MEM and added to the cells which they were in the growth medium. Is it a right way? or should I culture cells in the opti-MEM medium for a while and not in...

26 February 2021 10,041 3 View

Onset of Photo Oxidation in Polymers?

Hi! I am looking for some specific information in regards to the minimum amount of UV intensity required to begin the photo degradation process in polymers. I understand each polymer is...

15 February 2021 7,703 4 View

Differences between sheep blood with Alsever solution vs citrated/defibrinated sheep blood in microbiological media?

I am aware of a study that has compared the use of citrated and defibrinated sheep's blood in microbiological media (Hair Sheep Blood, Citrated or Defibrinated, Fulfills All Req... ), but can...

10 February 2021 5,927 1 View

Are there any differences between setting automatic or manual number of measurements in DLS?

When doing measurements in DLS (either size or zeta potential), I have the option to input an automatic number of measurements or to set it manually. My question is: is there a drawback in...

08 February 2021 9,423 6 View

Alpha and dense granules in platelets not visible in Transmission Electron Microscopy?

I am trying to visualize alpha and dense granules in platelets. However, it seems like the granules were not stained well. Is there any way I can improve my staining technique to obtain better...

04 February 2021 5,925 9 View

Which aqueous solution should I test to make positive NPs stable to get mayor zeta potential +40 mV?

Hi, I need to find the correct media to make my positive charge NPs stable in an aqueous media. I have tried different solutions at different pH but the zeta potential does not increase more than...

21 January 2021 6,490 6 View

Any HPLC validated method available to separate tricholine citrate and cyproheptadine hydrochloride from any formulation?

Need to have a validated, stable method to separate tricholine citrate and cyproheptadine hydrochloride from a syrup formulation.

20 January 2021 4,216 2 View

Can Vibrio campbellii bioluminescence be obtained when cultured on Mueller-Hinton agar?

Need to check quorum sensing activity of Vibrio campbellii.

20 January 2021 570 5 View

How to view the electrostatic potential value of a Gaussian09W result?

Hi all I am able to view the electrostatic potential surface using Gaussview to see the calculating result from Gaussian09W of a small molecule. However, the strength is represented by color. I am...

19 January 2021 5,448 3 View

Rafik Karaman

Dear Kalyan,

Sodium citrate (E0 = −0.180 V).

For more information, please see attached file and reference 18 therein.

Hoping this will be helpful,

Rafik

Kalyan Sadhu

Dear Rafik,

thanks for the information.

Kalyan

Hilal S. Wahab

Can anyone please provide the information regarding reduction potential of

2-oxoglutaric acid (alpha-keto glutaric acid) in aqueous medium?

Alexander Galushko

Dear Hilal, you can find the standard redox potential values in the excellent review of Prof Thauer about citric acid cycle:

Thauer RK (1988) Citric-acid cycle, 50 years on. Modifications and an alternative pathway in anaerobic bacteria. Eur J Biochem 176:497–508

Ammad Hassan Khan

What did you find exactly?