Recommendation for good Blot scanners

08 August 2017 0 7K Report

What are good scanners for Western Blots that show a sensitivity similar to grey x-ray films?

Badges
Science method

More Jan E Ehlert's questions See All

Can anyone recommend a good pan STAT1 antibody?

Hi, I am looking for a commercially available antibody that detects pan STAT1 directly in blotted lysates and gives sensitive and clear cut results. Thank you for your help. Cheers, Jan

08 September 2018 4,693 1 View

What experience do you have with the WES system from Protein Simple?

I am interested to know how it compares to standard SDS-PAGE/Western Blotting procedures in terms of sensitivity (using grey x-ray films), separation quality, handling and overall costs. Any...

06 July 2014 5,950 3 View

Does anyone know what might be causing the smeared bands on my western blot?

I got these smeared bands quite often lately. We typically run the gel at 140V with a 10-12% gel and do a wet transfer at 220 mA for 1.5 hr in cold room. We also noticed some dirty spots/dots (see...

10 August 2024 7,480 3 View

I need JCPDS file of LSFCO nanomaterial. Can anyone provide me?

Require for Rietveld refinement in XRD.

08 August 2024 3,081 2 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

How to fix background error in rietveld refinement of one XRD peak using GSAS-II?

I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II

05 August 2024 5,291 2 View

How to calculate the molar proportions of the oxides from the XRF analyses?

02 August 2024 2,565 2 View

Hello, regarding Mxene 2D titanium carbide?

I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.

02 August 2024 6,789 4 View

Why Powder XRD is performed after cruhsing a crystal if Single Crystal XRD analysis of the same crystal has been performed already ?

What information we can get from PXRD analysis other than from SCXRD analysis of a crystal ?

30 July 2024 6,261 4 View

How can I get clearer background for my western blot?

I am running a western on HIV envelope protein. The size is around 50Kda and I am using rat anti-HA for the first stain and a second stain of mouse anti-CA. Primary antibody dilution is 1: 1000...

29 July 2024 6,484 5 View

Can anyone guide me the best method to analyze the XRD data???

I will be doing an XRD on a sample which is powdered in natured and is a hydrogenated compound. I would like to know how we can understand the individual components and components by using the...

28 July 2024 4,548 2 View