CI engine use to give stable torque output and lower cylinder to cylinder variation. Can anyone suggest me reasons for the same.
following
CA 50 - 50% burn (crank angle) from a 'rate of heat release vs crank angle' curve for a given...
09 October 2018 442 1 View
Dear all Can anyone provide me the details of fuel injection duration, injection quantity and rail pressure at which a GDI engine operates at full load, part load and idling conditions. I am in...
06 July 2018 7,220 0 View
Dear all I wish to know what is the rise in temperature of the fuel compared to the ambient temperature once it leaves the fuel injector nozzle in GDI. The temperature increase can be due to...
06 July 2018 4,991 1 View
Dear all I wish to know whether any one is working on Radar system for autonomous vehicles. I wish to know who is the supplier of the same. I need only a few systems. Can i get any system that...
02 March 2018 5,406 5 View
Beginners can use this for understanding the basics. http://www.iitg.ernet.in/scifac/qip/public_html/cd_cell/internal_combusn_engines.htm
02 March 2018 3,047 0 View
We all know that earth core is at very high temperature. Is it possible to extract that energy out from there? Geothermal as of now the technology is not well mature enough as per my opinion....
01 February 2018 4,516 4 View
I read in one fluid dynamics text that flow can remain laminar even up to 8000 to 10000 Reynolds number when it flow through a pipe. If the medium is undisturbed and surface is smooth enough. So i...
01 February 2018 8,834 22 View
I wish know in detail about 1. In cylinder turbulence pros and cons. 2. Effect of tumble. 3. How to analyze the vortices formed and its effect? 4. Velocity vectors and its importance. 5. Flow...
01 February 2018 6,697 0 View
Hai can anyone suggest me a simple and good book/paper that can give me more insight into turbulent kinetic energy in IC engine related studies.
31 December 2017 3,804 2 View
We will be having cars with forward looking radar or ultrasonic sensors which will look for obstacles in a car. If two signals from 2 cars interfere and if it result in wrong estimation of value...
31 December 2017 767 3 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.
08 August 2024 3,161 0 View
I am working on developing a MATLAB Simulink model of Wind turbine with PMSG followed by MPPT Boost converter. I have gone through so many literature and videos but I am not finding clear solution...
03 August 2024 888 1 View
All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.
01 August 2024 589 4 View
I am using a Bruker 600M solid-state NMR spectrometer with a Micro 2.5 microimaging system. The test sample is a tube of 1M LiCl aqueous solution, and the nucleus detected is 1H. I am trying to...
01 August 2024 9,227 1 View
Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...
25 July 2024 2,920 11 View
In the context of Electron Spin Resonance (ESR) spectroscopy, under what conditions is an absorption spectrum considered to be a single absorption spectrum?
25 July 2024 2,325 1 View
It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...
24 July 2024 8,596 2 View
Hi, everyone This figure depicts a simulation of an electrostatic energy harvesting system in COMSOL Multiphysics software. My question is regarding the relationship between the changes in...
19 July 2024 4,694 4 View
Hello everyone, I am facing a consistent issue in my NMR spectra with an unwanted peak appearing at 1.25 ppm. This peak seems to vary with the amount of sample: it becomes more pronounced with...
15 July 2024 9,065 4 View