I have been trying to save a voxelprint grasshopper .gh file as .inp file to export it to Abaqus cae for 3D printing process simulation, but iwas unable and i couldn't find any tutorial anywhere for the issue, please anyone for help? @Gieljan Vantyghem @Ticho Ooms @Wouter De Corte
Febin Cherian John
Install the Abaqus plugin for Grasshopper. You can download the plugin from the official Abaqus website. Open your Grasshopper file (.gh) in Grasshopper. Install the "Abaqus" component in Grasshopper. You can find this component in the "Mesh" tab in the "Kangaroo2" plugin. If you don't have the "Kangaroo2" plugin, you can download it from the official Grasshopper website. Connect the "Abaqus" component to your Grasshopper geometry and mesh components. Make sure that the mesh is compatible with Abaqus. Set up your simulation parameters in the "Abaqus" component. You can specify the material properties, boundary conditions, loads, and other simulation settings. Click the "Export" button in the "Abaqus" component. This will save your Grasshopper file as an Abaqus input file (.inp). Open Abaqus and import the .inp file. You can now run the simulation and analyze the results.
To save a Grasshopper file (.gh) as an input file (.inp) for simulation in Abaqus, you need to follow these steps:
Please keep in mind that the Abaqus plugin for Grasshopper is not officially supported by Dassault Systèmes, the developer of Abaqus. Therefore, you may encounter compatibility issues or other problems. Make sure to test your simulation thoroughly and consult with experienced Abaqus users if you have any questions or concerns.
0 votes
0 thanks
- Badges
- Science topic
More Patrick Kazeneza Rugira's questions See All
Similar questions and discussions