Molten Salt Chemical Exergy ?

More Navid Nedaei's questions See All

How two melting peaks in DSC of polypropylene can be merged into one crystallization peak?

The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...

03 March 2021 5,857 3 View

Does anyone here uses the Software for Roche LightCycler 2.0 instrument?

Hi everyone, If anyone here uses Roche LightCycler 2.0 instrument for qPCR experiments, I would appreciate if they message me. I have some questions about it. Best - Navid

12 October 2020 6,234 2 View

What is an acceptable FDR% for proteomics data publication?

Is there an established convention on this? I have heard from experts that 1% FDR is recommended. I was wondering can we report protein IDs at 5% FDR. Is there any published guidelines on this? If...

25 August 2020 1,231 4 View

Does the expiration date affect the binding capacity of Ni-NTA?

Hello! I have some expired Ni-NTA resin (QIAGEN), and I need to purify my His-tagged protein. Does the expiration date affect the binding capacity of Ni-NTA? Thank you in advance

11 June 2020 5,773 5 View

How can concrete be modeled with a GFI in ABAQUS?

Hello dears I am modelling concrete in the Abaqus and need to know GFI behavior and parameters them. How can concrete be modeled to the ABAQUS? Thanks

03 March 2020 4,116 3 View

Is there any good free software to simulate electron trajectory in non-uniform electric field?

Need to simulate electron trajectory in non-uniform electric field.

08 February 2020 8,963 3 View

New project in Cathodic Protection?

What fields (topics) do you suggest to work as a metallurgy and Technical Inspection master degree Student in Cathodic Protection? Thank you kindly

17 January 2020 4,201 5 View

Should the effective stresses be constant during the effective stress numerical analysis?

Assuming running the undrained effective stress analysis in FLAC3D via Config FLUID using the effective stiffness and strength parameters, are we expecting the constant effective stresses in the...

15 July 2019 6,096 3 View

How to model the distribution of the population from a facility to other near facilities (for example a school) when it is decided to be destroyed ?

how can we model the distribution of the population from a facility to other near facilities (for example a school or a hospital) when it is decided to be destroyed

25 June 2019 4,220 3 View

Fluorescent staining of bacteria and fungi?

Hi all scientists, I am going to determine the LIVE/ DEAD fungi and bacteria cells with fluorescent dye in the possible biofilm on my plastic films surface. I have TTC (tetrazolium chloride) but...

05 June 2019 2,709 2 View

Irradiation data for JAPAN?

Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...

03 March 2021 961 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Help request in CST microwave?

im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...

02 March 2021 2,246 2 View

How can we obtain a modification factor for creep parameters?

I want to obtain standard creep parameters of salt rock by creep parameters of rectangular samples. Is there a modification factor to convert creep parameters of rectangular (prismatic) rock salt...

01 March 2021 7,131 1 View

Anyone found any research papers on solar furnace design calculations (for solar concentration)?

I am thinking about working on solar furnace with heliostats that concentrate sunlight and heat molten salt, but currently no luck with research. Not a lot of papers based on the subject. (check...

01 March 2021 5,023 5 View

How to size battery banks?

I am designing a small grid connected solar PV power-plant. As the battery's capacity is specified in Ah and demand in kWh. What is the best way to size the battery bank? I have battery price in...

28 February 2021 1,638 3 View

How to design a boost converter for a mppt controller?

I have a doubt on how to select the inductor and capacitor value when I want to implement MPPT controller. This is because we always take a maximum output voltage and current but in this case, we...

28 February 2021 3,637 2 View

Which transition metal salt precursor is best for doping? Why?

I would like to synthesize a transition metal doped TiO2 via solgel method. Hence, I would like to know which metal salt precursor to choose among Chloride, Nitrate, and Sulphate. A clear...

27 February 2021 4,285 3 View

How to sample data to increase presence of solar panels in the images?

I am working on creating deep neural network on geospatial dataset and wanted to know how to do the sampling so that I can increase the presence of solar panels in the images. I cannot use entire...

25 February 2021 3,936 6 View

What are the saturated salt solutions that can give specific relative humidity of 35%, 65% and 95% for conditioning wood specimens?

Due to the unavailability of climate rooms, I want to carry out an experiment that require the use of certain saturated salt solutions especially those that can condition the wood specimen to 35%,...

25 February 2021 8,139 1 View

Qamar Ul Islam

Dear Navid Nedaei

Newer designs using liquid sodium have been demonstrated, and systems using molten salts (40% potassium nitrate, 60% sodium nitrate) as the working fluids are now in operation. These working fluids have high heat capacity, which can be used to store the energy before using it to boil water to drive turbines.

Kind Regards

Hendry Y. Nanlohy

Dear Navid,

Hopefully this article and several other articles that are in the reference can lead you to the answer.

Best regards.