I'm completely new to ABAQUS and trying to model a friction welding process for AL alloy and steel. I'm facing difficulty in giving the steps and also the boundary conditions. Can anyone please help.
thank you
I am sending the useful document as an attachment.
@pankaj biswas- thanks for sharing the related useful information.
There are some tutorials in YouTube in this subject.
Hello, I am trying to tie a Eulerian object to a Lagrangian body or surface in order to give the Eulerian material translational and angular velocities using ABAQUS/CAE. In the ABAQUS...
02 March 2017 6,102 7 View
Hello Everyone ! I'm doing analysis of a welding process using Coupled Eulerian-Lagrangian approach in ABAQUS/explicit. I have created a model (two layers of workpiece, one eulerian part, and a...
05 June 2016 1,689 10 View
Hello, my model of friction welding process is failing due to excessive distortion, although I've specified ALE adaptive mesh for the concerned domain. I need help in giving adaptive meshing...
04 May 2016 821 3 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
What should be the equation for halfway bounce back boundary condition for flow field with forcing term?
08 August 2024 7,938 1 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 719 0 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View
I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...
29 July 2024 9,572 3 View
Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...
28 July 2024 8,169 0 View
There are three operating parameters - the laser power, the diameter of the focus spot and the scanning speed. It is necessary to obtain a seam of a given depth without pores. What parameter...
27 July 2024 7,168 2 View
hi, I am doing a risk analysis of a cylindrical fuselage with windows. I have applied contact interactions between the different parts, and I have applied a unit value load to a reference point,...
20 July 2024 647 2 View