Due to the Covid -19 , I'm unable to get supply of chemicals. At the moment, I have only left Trypan Blue with me. Is it possible for me to use Trypan Blue to stain fungus? Please help me with my doubts?
Hi Banupriya,
of course you can, and in many cases, this will be the first choice. Check Boedjin's original publication on this regard.
Article Trypan Blue as a Stain for Fungi
best
Francisco
Hi friend,
The answer is yes.
Several authors have used 'trypan blue' for staining fungi and the earliest paper I found dates back to 1952.
https://www.tandfonline.com/doi/abs/10.3109/10520295609113788?journalCode=ibih19
Some other papers:
http://m.cshprotocols.cshlp.org/content/2008/8/pdb.prot4982.abstract
https://pubmed.ncbi.nlm.nih.gov/21356882/
Hope this helps !
Thank you
please give any suggestion?
04 February 2021 4,837 5 View
We have carried out high-pressure Raman characterization on some of our samples. After fitting, I have observed a change in D-peak position with increasing pressure. What does this change...
20 January 2021 853 3 View
Hi everyone iam facing a problem to give control signal for switches in design of PSFB converter in matlab simulink. Anybody's help will be appreciated.
14 December 2020 6,021 3 View
As of now, Only industrial wastes were using as pozzolanic materials in concrete to enhance the durability of concrete. Can any once suggest me the alternatives of those materials?
11 October 2020 3,569 4 View
i have a question regarding dielectric constant of gold,cobalt oxide (co3O4) and n-tpe silicon . i find only one publication on this issue showing dielectric function cobalt oxide(CoO) 12.9 and...
02 October 2020 9,138 4 View
We are looking to immobilize some of our enzymes on Eupergit beads. I was wondering if you know any commercial supplier of Eupergit beads?
28 September 2020 5,664 3 View
Please kindly suggest some good FEM softwares for the numerical solution of both time-dependent and time-independent stochastic PDEs.
28 September 2020 6,598 4 View
I have developed a 3 bay 5 story 2D frame in Opensees but I have problems with element load and application of seismic load in Opensees using an acceleration file. I always got an error namely...
27 September 2020 5,885 4 View
Any CPL is modeled with a current source in parallel with negative resistance. How do we evaluate the negative resistance, if we know the constant power consumed by the load?
19 September 2020 6,188 3 View
I need to model a reinforced concrete beam subjected to 4 point bending. I also need to plot the load vs displacement at mid span and compare it with the experimental data. Bond between concrete...
10 September 2020 9,004 4 View
Hello, I am looking for some expertise on culturing MCF7s. I purchased them from ATCC and I have been following all media and culture conditions. Media is EMEM with 10% FBS and 10ug/mL of...
27 February 2021 3,904 2 View
Hello, I'm working on removal of methylene blue. 01. in the dark test very first reading is taken 15 minutes after adding adsorbent to the dye solution and that UV absorbance reading is very...
19 February 2021 472 5 View
Does anyone have the similar issue? A line across the denature SDS gel shows up after staining with Coomassie blue and there are many lines in every lane if you take a closer look. This gel had 15...
07 January 2021 5,610 4 View
I'm still confused. Whether to determine the methylene blue orientation, I have to use the order parameter (gmx order) or the gmx angle? I want to determine the orientation of the methylene blue...
31 December 2020 2,386 3 View
What program can I use to evaluate two images from an optical microscope, e.g., before and after methylene blue staining. I would like to quantify the degree of staining of cells with a dye....
14 December 2020 9,223 2 View
I'm pretty sure they are mostly macrophages since after a 2 hour incubation in M199 they are stuck with pseudopodia. My slides just aren't pretty enough for me. I'm using Fisherbrand Wight-Giemsa...
13 December 2020 5,475 3 View
Hello, I am writing this hoping someone can help me. I am just starting out with BN-PAGE and I have a transfer problem. It seems each time I transfer (2 membranes at a time) in a BioRad wet...
09 December 2020 1,008 3 View
Now, I have got a metal-doped perovskite in which blue shift happens result. I tried to make it a more blue shift to get a stable and very blue perovskite. So I think is there any possible...
04 November 2020 8,384 3 View
Hello! Is there anyone who could recommend a protocol for testing the permeability of the blood brain barrier in mice ? I tried to use these protocols (Assessment of Permeability in Barrier Type...
01 November 2020 8,191 3 View
i want to know the protocols for H&E Alcian blue method for studying histology of intestine of fish
26 October 2020 6,351 3 View