How to perform static structural analysis in ansys to calculate Gear body & Gear tooth deformation due to rotational speed?

22 May 2024 0 8K Report

I would like to calculate the gear wheel and gear tooth deformation due to rotational speed?

The gear shaft is mounted on hydrodynamic bearings. What are the boundary conditions need to apply? How to apply rotational velocity to gear in ansys?

How to calculate the gearbody and gear tooth deformation due to rotational velocity?

Badges
Science topic

More Manikanta Reddy's questions See All

Dear all, Iam currently working on Dc Microgrid model for electrical vehicle charging. Can any body give good IEEE research paper on this topic?

please give any suggestion?

04 February 2021 4,837 5 View

What does the change in D-peak position in Raman spectroscopy of carbon materials indicates?

We have carried out high-pressure Raman characterization on some of our samples. After fitting, I have observed a change in D-peak position with increasing pressure. What does this change...

20 January 2021 853 3 View

PSFB control signal?

Hi everyone iam facing a problem to give control signal for switches in design of PSFB converter in matlab simulink. Anybody's help will be appreciated.

14 December 2020 6,021 3 View

What are the alternative to the pozzolanic materials to in concrete to enhance the durability of concrete?

As of now, Only industrial wastes were using as pozzolanic materials in concrete to enhance the durability of concrete. Can any once suggest me the alternatives of those materials?

11 October 2020 3,569 4 View

Can any one suggest me the dielectric constant of Gold and Co3O4 at room temperature ?

i have a question regarding dielectric constant of gold,cobalt oxide (co3O4) and n-tpe silicon . i find only one publication on this issue showing dielectric function cobalt oxide(CoO) 12.9 and...

02 October 2020 9,138 4 View

Eupergit beads for enzyme immobilization?

We are looking to immobilize some of our enzymes on Eupergit beads. I was wondering if you know any commercial supplier of Eupergit beads?

28 September 2020 5,664 3 View

Can somebody kindly suggest a good FEM software for the numerical solution of stochastic PDEs?

Please kindly suggest some good FEM softwares for the numerical solution of both time-dependent and time-independent stochastic PDEs.

28 September 2020 6,598 4 View

How to run Seismic analysis for the following model in OpenSees..?

I have developed a 3 bay 5 story 2D frame in Opensees but I have problems with element load and application of seismic load in Opensees using an acceleration file. I always got an error namely...

27 September 2020 5,885 4 View

How can we evaluate the conductance of a constant power load (CPL)?

Any CPL is modeled with a current source in parallel with negative resistance. How do we evaluate the negative resistance, if we know the constant power consumed by the load?

19 September 2020 6,188 3 View

How to learn the modelling of RC beam subjected to 4 point bending in Ansys Mechanical APDL?

I need to model a reinforced concrete beam subjected to 4 point bending. I also need to plot the load vs displacement at mid span and compare it with the experimental data. Bond between concrete...

10 September 2020 9,004 4 View

How can we limit artifacts caused by rotation in fiber photometry?

We are trying to run fiber photometry experiments for long time scales, but we get these sinusoidal artifacts that come up. We think they may be caused by twisting of the fiber optic subject...

25 February 2021 568 1 View

Buckling analysis of a cylindrical shell in Ansys APDL?

In Ansys APDL, We are trying to validate our shell model for nonlinear buckling analysis considering the initial imperfection (as given by Ahmed et. al.) We have attached our results as attached....

13 February 2021 9,200 5 View

How to deal with cross loadings in EFA?

There is an issue of cross-loadings in my output results after running an EFA with varimax rotation. Should I ignore these cross-loadings since these differ by more than .20?

12 February 2021 802 4 View

Is it necessary to include orbital dynamics (translational) in attitude dynamics (rotational) problem?

I want to simulate satellite attitude control with a quaternion attitude representation. thrusters and reaction wheels are the main AOCS controllers. is it Ok to omit orbit dynamics (orbit...

31 January 2021 5,094 2 View

how to add blood and plasma in comsol?

I am trying to model separation of the plasma from the blood on a rotating microfluidic platform. I am not able to add blood and plasma in Comsol. someone please provide me your valuable...

27 January 2021 8,263 1 View

How to rotate an anisotropic stiffness matrix to an orthotropic matrix of cancellous bone?

Hi everyone, recently i have a question about how to calculate the orthotropic elastic matrix of cancellous bone cube. I really need the help!!!! I applied six stress states to the cancellous...

21 January 2021 9,143 2 View

How to calculate the electric field in the rotating frame (the question in the general relativity)?

In the classical electrodynamics, there is one problem - to find the EM fields created by the charge moving with the constant velocity in the circular orbit or in the helical path (free electrons...

12 January 2021 3,689 1 View

How to rotate crystal structure to match with match another structure of same compound/polymorph?

Say, I have two crystal structures of a particular organic molecule, the crystal structures are basically identical, apart from a rotation and redefinition of the lattice vectors/angles, a simple...

07 January 2021 3,406 5 View

Gear reduction for back-drivability of a motor?

Hi everyone, Does anyone know up to what reduction ratio of gear does a motor remain back-drivable? I want my robot to have safe interactions with the environment and other humans. Can you give a...

26 December 2020 7,142 3 View

How to formulate the dynamics of the body of a legged robot(quadruped/hexapod) ?

I need to formulate the lagrangian dynamic equations for the hexapod robot's body. The body will constitute 6 DoF, which is 3 linear and 3 angular. I have the coordinates of each corner of the...

24 December 2020 1,222 1 View