Is there anyone who has ever encapsulated aniline to use it in dyeing processes?

12 December 2018 0 898 Report

I am working at the encapsulation of aniline in carriers to use them in the dyeing processes. Is there anyone who has ever encapsulated anilines ?

Badges
Science topic

More Paolo Trucillo's questions See All

What is alpha-lipoic acid solubility in water?

It is well reported in literature that alpha-lipoic acid solubility in ethanol is 30-50 mg/mL, but it is not widely reported its value of solubility in water. Does anyone have information about this?

10 November 2016 1,757 1 View

How can I calculate the terminal velocity of a water drop atomized in a dense gas medium, taking into account gravity, buoyancy force and attrition?

The process that I need to describe is a water atomization by using injectors of micrometric diameter. Starting from a fixed volumetric water flow rate, I have to spray the droplets inside an...

02 March 2016 4,448 6 View

Could dyes amplify the spectrum of light to a specific wavelength?

I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...

05 August 2024 3,290 1 View

Can i quantify a nanoparticle encapsulated in cell culture medium by hplc?

Hello, if you made a transwell assay where you incubate the cells with a nanoparticle-encapsulated drug and considering that in the oposite compartment you'll have both the free and encapsulte...

03 August 2024 2,730 1 View

Waht is the effect of isoelectric point on MB dye photodegradation by ZnO nanoparticles?

Recently I have submitted an article regarding MB dye degradation by ZnO nanoparticle. I received a suggestion to include the discussion on the effect of pH. I want to know what is the impact of...

19 July 2024 4,868 1 View

What does an additional peak in FTIR between 3100 and 3300 nm affect the quality of the material, benzethonium chloride USP??

I do not know much about FTIR! The material Benzethonium Chloride USP was compared to a reference standard in regards to FTIR, as per the USP testing: Identification B. Infrared absorption (FTIR),...

16 July 2024 6,918 7 View

Help me to identify these fungal slides?

These fungal slides are isolated from cultured Bread mold on PDA media and smear is treated with Lacto phenol Blue dye ..

13 July 2024 9,701 1 View

Asked a separate ways?

Dear all, I have a question regarding ways to separate ammonium nitrate and phosphorus pentoxide？

12 July 2024 3,164 2 View

Does the potentiostat have to be in a fume hood when polymerising the PANI?

I will polymerise Aniline on ITO glass WE, using 1M of H2SO4 and a potentiostat. However, I am not sure if I have to do the electrochemical polymerisation inside a hood. Is it necessary? Is the...

10 July 2024 2,937 3 View

I want to ask why the poly aniline film does not stick to the ITO type substrate knowing that I used the electrodeposition method?

In order to make a polyaniline film, I used the electrodeposition method and set all the conditions, but I noticed that the polymerization process is happening, but it doesn't stick to the...

09 July 2024 2,708 2 View

How can magnetic Biochar remove dye pollutants, is this technology beneficial?

The harmful Dye pollution from industrial processes such as textile generated how to remove with magnetic biochar ?

07 July 2024 8,118 1 View

Sybergreen qpcr troublshoulting?

500 ng RNA is converted to cDNA to be genetically expressed by qpcr sybergreen dye, 1 ul primer F, 1 ul primer R, 10 ul master mix, 1 ul cdna template, and instead of a complete total volume...

06 July 2024 5,478 4 View