Is it possible to export mesh from abaqus for using in Ansys Fluent?

Hi everyone, I want to mesh a part in Abaqus for further use in ANSYS Fluent because this way, it is much easier and faster to get a high-quality mesh. Is it even possible to generate a file...

15 January 2021 5,665 3 View

What are the (extrinsic) factors that influence the citation rate of a research article?

Dear RG members, Excluding the (intrinsic) factors such as quality and content of an article, what are the extrinsic factors/predicors that influence the citation rate of a research article? Is...

07 January 2021 3,410 3 View

Natural frequency extraction with ABAQUS?

I have modeled the RC beam with simply supported BC and I have got the frequency value for the case of the beam, but I have 150 modes for each analysis and I have to see them one by one to find...

05 January 2021 8,626 3 View

How high is the saturation electric field of P-E loop in Relaxor Ferroelectrics?

I have prepared a relaxor ferroelectric (KNN - BZZ solid solution) bulk sample. During P - E loop measurements, we experienced saturation electric field of about 100 kV/cm before dielectric break....

29 December 2020 9,080 3 View

What is the best way to simulate the fractional controllers?

What software do you prefer?

29 December 2020 889 3 View

What is New Next Generation Attenuation Relationships (NNGAR) and how are they different from other attenuation relationships?

Dear researchers The provisions of ASCE 7-10 states that New Next Generation Attenuation Relationships (NNGAR) has been used in the process of Probabilistic Seismic Hazard Analysis (PSHA) to...

15 November 2020 1,132 4 View

Stiffness changes of the structures due to modeling P-Delta effects in Sap2000 are more significant than OpenSees. which is more accurate?

Dear researchers The modeling of P-Delta for the structural elements (specially columns) reduce the stiffness of the structure and consequently increase the period of vibration. Now, these...

24 October 2020 7,255 5 View

Why 256x256 medical image gives me 256x256x3 in matlab?

I need a 256x256 pixel image to use it in my project. I downloaded images from the internet, but when I read the image, it stored in a 256x256x3 variable (color image format PET images). the NSCT...

11 October 2020 686 13 View

What are your suggested topics for future research?

Hello to all professors and researchers, What is your suggested topic for conducting an academic-operational thesis in one of the most up-to-date and efficient fields? Please express your proposal...

07 October 2020 395 56 View

What has been the positive effects of Covid 19 virus on the world energy demand from your point of view?

Hi every one, The power consumption of servers, computers, and Internet networks may have increased due to the increased use of virtual platform-based systems. The transportation system...

05 October 2020 9,615 5 View

Looking for Materials with high thermal expansion coefficient and high temperature resistance?

03 March 2021 8,272 1 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

Discrete Phase model (DPM) particle break-up has particle size limits during particle tracking?

Hello, I am currently working on simulating water droplet partciles in a closed room. When I use uniform particles, without "particle break-up", I can carry out the simulation without any problem....

02 March 2021 3,053 2 View

How to grow E.coli on the low salt LB agar plate with 50 or 100ug/ml of Blasticidin?

Hello, I would like to ask how to grow E.coli which resists 50 or 100ug/ml of Blasticidin. I have tried many methods by using low salt Luria-Bertain(LB) agar plate. However, no colonies grow. Let...

01 March 2021 2,027 2 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Distribution of particles in metal matrix?

How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...

28 February 2021 7,397 8 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

Is there a deep reason for using the squared modulus of the wave function as the probability density of the existence of the particle?

I think we were all surprised at the first time we got to know quantum mechanics that the squared modulus of the wave function is the probability density of the existence of the particle? The role...

28 February 2021 6,282 9 View

POlymer+DMSO solution and moisture??

What could be the reason of moisture at the sides of Vial when I am preparing my polmyer+DMSO solution for membrane fabrication? What etiquettes I am possibly missing here?

28 February 2021 6,516 5 View