Physical-chemical formation of stalactites/stalagmites. what promotes the formation/growth of these structures?

I know, or think I do, the basic idea behind these natural structures, as from what I know they form due to water dripping from the top leaving a salt deposit behind. But started to wonder about...

22 February 2021 1,400 4 View

Can the intensity of this broad band in XRD mask other crystaline phases present?

I obtained a XRD diffractogram with significant broad band at low 2theta levels, also around 30 2theta another smaller broad band appears. It all points out to the existence of an amorphous phase....

19 February 2021 8,414 4 View

Heat exchange due to humidity difference ?

Hello everyone. How can I simulate evaporative cooling between air and water (isothermal) placed in direct contact? Is it possible to choose or set the humidity difference as the heat exchange...

11 November 2020 5,225 3 View

How can I simulate evaporative cooling between substances in contact using Ansys Fluent?

Hello everyone I need to simulate a counter-current flow between air and water droplets (in direct contact) which by evaporative cooling give rise to a cooling of the wall on which the droplets...

07 November 2020 5,458 2 View

TPB: Can you use indirect questions for direct measurment?

Hi, I am doing a research with Theory of Planned Behavior. The behavior is attending a course/training on the subject of orientation, navigation and topography in the next year. I completed...

18 August 2020 4,502 1 View

Is it possible to use a muffle furnace without N2 atmosphere to make Biochars?

Greetings Everyone. I am reading several articles about biochars and notice several use N2 atmosphere inside the muffle furnace. can you produce biochars without this N2 atmosphere or other inert...

17 August 2020 8,992 6 View

How to convert GeoTiff to a format compatible with FRAGSTATS?

Dear all, I need to process several classified GIS maps in FRAGSTATS. All files are in GeoTiff format. I do not have ArcGIS. I also assume that when you export files to ASCII format in QGIS often...

01 July 2020 2,433 5 View

How to prepare (good) conductive nanocontacts?

Dear all, I need to prepare electrical contacts in order to connect a gold pad with a semiconductor (few microm size) . i cannot perform lithographic process. Hence, how can I obtain good...

09 June 2020 9,756 8 View

Are COVID-19 clinical datasets available?

Do you know if (anonymised) clinical high-frequency datasets of COVID-19 patients, such as pulmonary function, blood oxygen level, blood pressure, cardiac interbeat interval etc., are available...

04 May 2020 2,195 5 View

What tunes the selectivity of ionic exchange towards an ion? can we predict it? Is it pH dependent?

Cheers Everyone. I was seeing some uses of ionic exchange to recover NH4 by ionic exchange with other cations in a specific matrix. And it brought me to question what drives an ionic exchange to...

17 February 2020 6,596 3 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

Why does blocking with my immunogenic peptide cause nuclear fluorescence in ICC?

Hi all, I am validating a polyclonal antibody raised against human ANT4, through WB and ICC. In most of my controls, the antibody shows very little off-target binding, but when I pre-incubate the...

03 March 2021 5,999 3 View

What kind of fluid could I use for a pitfall trap that also does not invalidate molecular testing?

Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...

03 March 2021 5,978 5 View

Resistor definition in Piezoelectric bimorph with ANSYS workbench

Hello, good day! I am trying to simulate similar bimorph piezoelectric harvester with below commands. However, the output power doesn't change with resistor value. Please help to find the reason. ET,10,CIRCU94,0 !SET UP RESISTOR R,1,100000 !RESISTANCE VALUE TYPE,10 !SET ELEMENT TYPE E,1,2 !CREATE RESISTOR BETWEEN NODES 1 AND 2 Thanks in advance Regards,

02 March 2021 0 0 View

No title

02 March 2021 3,060 3 View