Initial condition for period 2 gait in simplest dynamic walker?

10 August 2018 1 1K Report

What are the initial conditions (x0, x0dot) for the simplest passive dynamic walker (introduced by Garcia et al.) to get period 2, 4, etc (not period 1) gait?

Jumaa Salman Chiad

It is a very interested question

Badges
Science topic

Similar topics
Phytochemistry
Extracts

More Sina Mehdizadeh's questions See All

To what degree does the immunohistochemical (IHC) evaluation of Ki-67 hold diagnostic value beyond neoplastic pathologies?

In the context of doctoral research, I utilized immunohistochemical (IHC) analysis to quantify the expression levels of the Ki-67 proliferation marker. While the application of this test and...

25 June 2024 7,825 2 View

What is the acceptable range of forces required to advance a delivery sheath to crimp a self-expandable nitinol stent for cardiovascular intervention?

Clinicians need to crimp the self-expandable stents into a delivery sheath so they can deploy it at a target site. I want to know if there are any researchers out there discussing the amount and...

17 June 2024 5,279 0 View

What is the typical speed of steering a steerable catheter by a cardiovascular interventionist?

Let’s say a clinician is using a steerable catheter and we want to see the range of velocities the clinician manipulates the steering module with. Are there any references citing this?

17 June 2024 4,289 0 View

What is the acceptable range for movement/deflection of anchoring points (reconfigurable anchor points) for a cable-driven parallel robot/mechanism?

I am working with a cable-driven parallel mechanism where the cables pass through anchoring points and connect to an end-effector manipulated by the user. In my setup, these anchoring points are...

14 May 2024 9,447 0 View

How to extract nitinol's superelastic parameters based on Auricchio's model?

I have done a stress-strain test and it looks like the picture attached. However, in here, I only have upper and lower plateau stresses. In Auricchio's model for the superelastic behavior of...

03 April 2024 9,575 3 View

Stent radial force requried to cause damage to artery wall intima?

I am working on the measurement of radial forces exerted by self-expandable cardiovascular stents. I need to know how much force can damage the intima of arterial walls? Please refer me to a...

31 March 2024 1,774 5 View

What are the best welding configuration for welding a cylindrical tube to a flat surface?

I'm welding (laser welding) a nitinol cylindrical tube to a nitinol flat surface, and I am evaluating three methods for the laser welding configuration (as depicted below): I) using a groove on...

26 March 2024 4,006 6 View

inquiry about adsorption isotherm for a structure with complicated behavior ?

The bio-adsorbent that I'm using has this weird behavior the first question is that I have been reading every quote online saying that non-linear fitting is a way better approach than linear...

07 March 2024 7,115 0 View

Fluid mechanics of air embolism and blood leakage through arterial catheterization interventions?

How can I calculate the risk of air embolism or blood leakage when using a microchannel catheter (polyimide, ID ~ 0.015") in femoral arteries, considering the pressure differences and factors like...

07 March 2024 320 0 View

Are very small or negative p-norm stress sensitivity values expected in global p-norm stress measure?

I'm working on p-norm topology optimization in plane stress using a MATLAB code adapted from the article An efficient 146-line 3D sensitivity analysis code of stress-based topology optimization"...

17 December 2023 1,282 2 View

Are there any good simple systems or platforms to recommend?

In order to show people the beauty of control and enhance enthusiasm for learning control theories, are there any good simple systems or platforms to recommend?

05 August 2024 10,034 1 View

How to start a Molecular Dynamics Simulation?

Is it possible to conduct a molecular dynamics simulation to see the effects of a specific carbohydrate on the structure of lipids (e.g., micelle structure)? I am a beginner in this field and plan...

03 August 2024 3,371 3 View

Which will be the best software for the Hydration shell analysis with molecular dynamics?

I am using a windows system, what software I should use for hydration shell analysis with molecular dynamics?

02 August 2024 3,143 4 View

Senescence-associated beta galactosidase staining is False Positive in control group?

Hi guys If anyone is currently working on aging cells, you guys would like to give me some advice. I'm testing against biomarker (SA-beta-Gal), I encountered a false positive in the control group...

02 August 2024 6,735 1 View

Are current regulations effective in preventing cancer caused by toxins?

I am currently researching the impact of environmental toxins on children's health and would greatly appreciate insights from experts in the field. If you are an expert or researcher working on...

02 August 2024 4,474 2 View

Some new emerging problems on application of RL for scheduling in IoT networks?

I have seen plenty of existing works on applied Reinforcement Learning (RL) policies for optimized scheduling in IoT networks including Q-learning, DQNs, and the newer ones including PPO for...

01 August 2024 8,754 2 View

How to make a Lateral flow control line more uniform?

We have a lateral flow test on Sartorius 140 NC. The conjugate is gold-monoclonal antibody. Using different control lines (GAM, protein A, protein G) we get a very strong leading edge with reduced...

31 July 2024 4,510 3 View

CAD File of human's & rat's respiratory airways ?

Dear all, I am working on particle deposition in human's & rat's respiratory airways using CFD and I am looking for the 3D CAD file for my simulations (STEP or IGES format). If somone has such...

29 July 2024 1,092 2 View

How to restart MD without using checkpint file in GROMACS?

Dear All Gromacs User I would like to restart MD without using checkpint .cpt files? I heard there is a way for acheiveing this. Any input and sugegstions are most welcome. Thanking You Budheswar

29 July 2024 3,084 8 View

How to prepare a molecule for molecular dynamics calculations?

If I want to calculate molecular dynamics (Gromacs), do I first need to optimize the geometry of the molecule? For example, I first draw the molecule in Avogadro, and then what? I guess I can't...

28 July 2024 673 3 View