Good morning , I am PHd student from Algeria, I am working on DC microgrid topic , My goal is to contribute to develop several techniques of control addressed to solve the problem of the instability due to constant power load, I got the first result , but I noticed much current ripples that reach 1 %. I need to know if my obtained result is acceptable or No.
The current ripple may be due to your controller parameters which were inappropriately designed. Unfortunately, results with such high current ripples will not be an acceptable. Check if the controller is able to track the reference properly or not. If it does with the same ripple, then it is advised that you check your controller gains again.
For your problem, kindly check IEEE standard. Kindly check attached picture.
- Badges
- Science topic
- Similar topics
- Engineering
- Control Theory
- Control Systems
- Control Systems Engineering