Algorithm to deduct process patterns in furnace operations behaviour ?

A casting plant with three identical aging furnaces is operating 24/7 using certain energy consumption and peak demand with data logging logging on 10 minute interval. I am trying to study whether...

03 August 2020 8,057 3 View

Is it necessary to do elution of proteins from Polyacrylamide gel?

Dear researchers, I would like to ask is it necessary to do Elution of proteins from Polyacrylamide gel before sending the protein sample to Nano-LC-TOF-MS Analysis? This is what I plan, I would...

01 August 2020 3,680 3 View

What resources or articles would you recommend for xenotransplantation procedures?

According to WHO, "the categories of xenotransplantation procedures include the following: Solid organ xenotransplantation; cell and tissue xenotransplantation; extracorporeal perfusion...

03 July 2020 6,962 1 View

Regarding on metabolomic?

Dear researchers, May I know how to know what metabolites will be produced by the cells from experiment (Wetlab): 1) Cell (cell culture) 2) Cell infected with virus 3) Cell treated with plant...

31 March 2020 5,865 3 View

How to make elution buffer for SDS-PAGE?

Dear researchers, How to make elution buffer for SDS-PAGE? There is a lot of protocol to make elution buffer, but they didn't show the amount of each ingredient needed. thank you.

25 March 2020 8,333 4 View

Elution of protein from SDS PAGE ?

Dear researchers, May I know do anyone can suggest the protocol of protein elution from SDS PAGE ? Any simple and inexpensive methods? Thank you.

24 March 2020 2,073 13 View

Regarding on Proteomics ?

Dear researchers, I'm currently doing a study regarding on antiviral mechanism of selected plant using metabolomic approach. Plant extract (fruit) will be used and the virus model will be used is...

21 March 2020 5,885 2 View

Are Metabolite extraction in bacteria same as virus ?

Dear researchers, Are Metabolite extraction which done in bacteria same as virus? Thank you.

03 March 2020 3,500 3 View

Which dialysis buffer suitable to use in dialysis (protein sample)?

Dear researchers, I would like to carry out dialysis on my plant extract before carrying out SDS-PAGE. Beside 0.2M sodium acetate buffer (pH 5) can as dialysis buffer, may I know which dialysis...

18 February 2020 1,790 2 View

Protein extraction and metabolite extraction protocol ?

Dear researchers, I found a lot of Protein extraction and metabolite extraction protocol on the website. I have no ideas on which protocol I should use .... May I know do anyone can suggest me a...

18 February 2020 400 3 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

How to get better phase shift in C-V curves for ferroelectric devices?

I tried to sweep my ferroelectric devices from -2V to 2V and then from 2V to -2V and The two hysteresis peaks are off by several microFarads. Should i increase bias voltage? I am doing these...

16 February 2021 8,514 2 View

Are there any thermochromic materials that reflect infrared light (~9000nm) at 10C and transmit infrared light at 25C?

So I know some metal-insulators (ex VO2) have thermochromic infrared-reflective properties, but most of these are insulators at low temperatures and conductive at high temperatures. Some...

07 February 2021 1,770 3 View

What is the role of top counter electrode when using perovskite thin-films in photoelectrochemical application?

I am currently working on perovskite based photoelectrodes, but I do not want to replace the counter electrodes including Ag, Au, will it have serious issue in the PEC performance?

13 January 2021 3,408 2 View

How high is the saturation electric field of P-E loop in Relaxor Ferroelectrics?

I have prepared a relaxor ferroelectric (KNN - BZZ solid solution) bulk sample. During P - E loop measurements, we experienced saturation electric field of about 100 kV/cm before dielectric break....

29 December 2020 9,080 3 View

How to Interpret Photoluminescence Spectrum of Mixed Pb-Sn FA0.7MA0.3Pb0.7Sn0.3I3 Perovskites?

Dear Researchers, I hope you all will be in good health. I am writing this to request for your guidance. I am working on the fabrication of low bandgap Pb-Sn mixed perovskite with exact...

23 December 2020 1,147 1 View

How to know if Zinc Oxide is coated on the glass substrates?

Hello all I have prepared Zinc Oxide nanoparticles using sol gel synthesis. I tried to coat the ITO and glass substrates with the ZnO nanoparticles ( dispersed in ethanol). But I am not sure if...

08 December 2020 3,692 8 View

What is the reason of suddenly increasing the concentration while evaluating the photocatalytic performance by RhB dye degradation?

I am doing a photocatalytic performance evaluation by RhB dye degradation. I am facing a problem which is: After achieving the absorption -desorption equilibrium, I checked the concentration and...

04 December 2020 3,922 20 View

What is the influence of reduced graphene oxide (rGO) in a p-n ternary photocatalyst?

04 December 2020 9,019 2 View

How to remove TiO2 nanoparticles from dye solution, in order to acquire an absorbance graph for the dye alone ?

I'm working on the degradation of various pollutants with bare and composite TiO2. Since the size of TiO2 is too small, the particles won't be settling down as we take the dye solution at...

01 December 2020 2,139 8 View