I need wet etching recipe for bismuth sodium titanate. If someone could help?

11 September 2017 0 5K Report

Badges
Science method

More Narjis Ghulam Nabi's questions See All

Can we use 30%hydrogen peroxide for catalse activity? If can, then why?

The question us regarding catalase activity check of bacterial strains. I saw an article in which it was written that we can use 30%hydrogen peroxide for catalase activity but in our laboratories...

12 July 2024 8,794 2 View

How we can use AI in plant identification and botany?

28 June 2024 8,807 3 View

How to calculate current density ?

I am using a rectangle Ni foam electrode area: (0.5 * 1 = 0.5 cm2) for OER and applying material to the area (0.5 * 0.5 = 0.25 cm2) and depositing the same area in the solution. Now, do I need to...

29 May 2024 1,454 5 View

Why Peroxide value increase in refined vegetable oil.?

at the time of filling the peroxide value is 0.5 however it increases with the passage of time. we have never faced such problem in past. please someone assist me in this regard.

22 May 2024 6,296 2 View

Question 2 What is the average daily solar radiation (kWh/m²/day) measured in the month of August?

August ( 6.29 ( kWh / m2 / day )

22 May 2024 8,274 1 View

Assistance with CTU-UHB Dataset Import for PhD Research?

Dear Researchers, I hope this message finds you well. I am conducting PhD research in Computer Science on fetal heart rate analysis. I am encountering difficulties in importing and using the...

19 May 2024 2,414 3 View

Can somebody explain me about this "NaCl-KCl (8 g), a molar ratio of 1:1 and an eutectic temperature of 657 °C"?

I want to prepare a photocatalytic material Bi3TiNbO9 nanosheets and the authors mentioned NaCl-KCl (8 g), a molar ratio of 1:1 and an eutectic temperature of 657 °C as a one component. So, kindly...

04 May 2024 9,282 1 View

What is difference between preservation and conservation?

26 April 2024 8,311 10 View

Any manual on digitization of herbarium specimens?

26 April 2024 2,065 2 View

Why the FTO showed high performance for pollutant removal in PEC system as compared to photocatalyst in the presence of PS or PMS oxidant?

The synthesized photoanodic material showed insignificant performance for persulfate (PS) or peroxymonosulfate (PMS) activation along with pollutants removal from wastewater. What are the main...

22 March 2024 985 0 View

What is the solubility of Iron (+3) in Bismuth Oxide?

Dear all: I am modifying Bismuth Tungstate with Hematite (Fe2O3), so I would like to know about how much Iron(+3) can form a solid solution in a Bismuth Oxide matrix. Best wishes Marco

29 July 2024 2,163 1 View

Sodium azide in immunohistochemistry?

Hello everyone, A collaborator sent us his protocol in order to be able to use his immunohistochemistry kits. But one step contains PBS + 0.3% H2O2 + 0.1% sodium azide. Knowing the dangerousness...

23 July 2024 6,314 3 View

Why binding energy is in positive number after performing mmpbsa?

I performed mmpbsa of protein-protein complex simulation on gromacs. My binding free energy is +166781. This complex is stable when experimentally produced in wet lab. In index.ndx I grouped...

19 July 2024 4,120 5 View

How do I prepare a working stock solution of 14C sodium bicarbonate to get a final activity of 3uCi?

I need to make a stock solution for radioisotopic incubations of freshwater sediments to study dark primary productivity but I have some confusion as to how I calculate the concentration of 14C...

15 July 2024 5,898 0 View

Is there an explanation of why a negative photoresist take-off after contact with ferric chloride (like in the pictures) ?

Deep etching Negative photoresist Acrylate polymer Chemical etching Ferric chloride Crosslinking Resolution

11 July 2024 2,476 4 View

NH3/NF3/H2 Remote plasma Oxi/nit selective etching mechanism help ??

Hello, I am an Etch Engineer. I am performing etching with high T_ox/Nit selectivity using remote plasma. Etching plasma is formed using only NH3/NF3/H2. 1. I wonder if it would be advantageous...

11 July 2024 8,115 2 View

Validated HPLC method for the estimation of the Amphotericin B ?

During the release test of Amphotericin B using 1% Tween 80, i observed three peaks even in the standard. The first peak consistently yielded results around 500%, while the other peaks showed...

08 July 2024 1,330 0 View

Can we detect DOC fractions through LC-OCD for a sample containing Sodium Azide?

I did some column tests in my lab where I needed to detect the DOC fractions using LC-OCD. For the abiotic columns I used sodium azide to restrict the biofilm formation. I did LC-OCD to detect the...

07 July 2024 468 0 View

What can be done when electronic minimization does not converge during geometry optimization in CASTEP?

Hello All, I've been facing difficulty in executing geometry optimization of a sodium polyanionic phosphate (Na4Fe3P4O15) crystal in CASTEP (please find the input and output files attached). When...

07 July 2024 8,626 2 View

Is it possible for the soil pH to be around 8, but with negligible amounts of carbonates, bicarbonates and exchangeable sodium?

Can this pH of 8 be due to the presence of other substances? Or do I have an error somewhere in the analysis? Thank you!

26 June 2024 9,093 4 View