I am looking for collaboration in writing a research paper; if anyone working in occupational safety, workplace accidents, Process safety ?

More Shatrudhan Pandey's questions See All

Not able to charge-discharge Li-ion coin cell at higher C rate ?

I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...

18 February 2021 1,450 3 View

No title

The Folin-Ciocalteu method is an electron transfer based assay, and gives reducing capacity, which is usually expressed as phenolic content. Can anyone share any reference paper where total...

13 February 2021 3,782 3 View

Is it possible to find out the wettability and contact angle of water on the rough or corrugated substrate?

First of all, whether it is possible to identify the presence of water and its amount on the Silicon substrate by using only FT-IR spectroscopy. Can ATR-FTIR spectroscopy find out the wettability...

03 February 2021 9,085 4 View

Following is XRD of iron oxide nano material synthesised using bipyridine derivatives. What are the reasons for Broad Humps?

Even after few repetitions..I am getting similar results. Is is due to organic components?

20 January 2021 9,279 6 View

Multicollinearity between bioclimatic variables in spatial distribution modelling?

Is there any manual guide to perform multicollinearity test between environmental (19 Bioclimatic) variables for MaxEnt modelling? Using all variables without removing the correlated one affects...

14 January 2021 3,807 7 View

Please share some research papers on the synthesis of Mn3O4 nanoparticles via Hydrothermal method by using Manganese(II) nitrate hydrate?

05 January 2021 9,040 4 View

What packages can I use in R for SEM and Paired Comparison data?

I am working on a career interest test which is based on paired comparison data. There are 12 dimensions in 6 groups. Each dimension from each group is compared with all dimensions of all other...

22 December 2020 8,186 5 View

How to improve total RNA concentration after transfecting the cells with the desired delivery system ?

Hello, I have been doing some transfection experiments for certain gene studies and wants to further do gene expression studies using qRT-PCR. Currently, I am using 7*10,000 cells per well for...

08 December 2020 6,981 5 View

Has anyone done/come around Dynamic modelling of Induction Machine using CODES and solved for transient response?

Hello, I've to get a transient response of an IM. For that, I have to simulate a dynamic Model, but the catch is, 'I have to do it all in codes' (preferably with backward Euler's method). The...

21 November 2020 10,019 3 View

How to increase the adhesion of electrospinned nano fiber's?

Hi i was trying to deposit the polystyrene nano fibers on aluminum substrate... Can anyone help me how to enhance the nano fiber's adhesion to the substrate? Like annealing pr vacuum drying ? Any...

16 November 2020 1,735 7 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

what is the simplest definition of ion exchange capacity

What this unit identifies for the ion exchange capacity ca. 0.92 meq. g-1. I am a newcomer in the membrane area. I just started. I highly appreciate your help

08 May 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

How to compare two groups with only two measurements?

Hiiiii everyone! I have an enquiry on statistical analysis. I was looking for many forum and it's still cannot solve my problem. I want to compare means of two groups of data but only with two...

03 March 2021 8,796 3 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Enhanced Yellow Fluorescent Protein (Aequorea victoria) DNA sequence?

I am on the lookout for the Enhanced Yellow Fluorescent Protein (Aequorea victoria) DNA sequence. Does anyone know where I can find it? Thank you in advance

03 March 2021 3,568 1 View

What kind of fluid could I use for a pitfall trap that also does not invalidate molecular testing?

Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...

03 March 2021 5,978 5 View

Md Khairul Shaleh Md Asari

I'm interested to join. Let me know your interest topics.

My PhD is in Behavior Based Safety.

Shatrudhan Pandey

Md Khairul Shaleh Md Asari Sir, Prevalence of workplace accidents, nature of injuries, and severity in the steel manufacturing industry, occupational health and safety in the steel industry and Safety 5.0 are some of my topics and research interest

Anastasia Fomina

Hello! I’m an ex engineer at industrial safety and now I’m a business analyst in IT company with products with industrial safety And also I’m preparing paper for being a doctor.

if I could help you, please write me on e-mail. [email protected]

Chibuzor Chika

Am chibuzor Chika a PhD Student in Occupational Health my Area of study is occupational Hazzard and am interested working with you ?

Ahmed M. Asfahani, Ph.D.

Hello, I am interested as the to topic is related to workplace safety. Please reach me at [email protected]

Suwattanapong Sribudda

Hello I am interested as all topic. I'm PhD Student in Occupational Health and working occupational health officer in hospital.

Ehi Iden

I am an Occupational Health and Safety Management Consultant, yes i am available if you can share your thoughts.

Enrique De Vicente

Hello, Im currently working on a Automate Cellular pragram of wildfires, in order to be implemented as a safety tool preventing accidents. I can work with you if you are interested.

Jose Carlos Reginato

Hi. I am master of engineering and resercher in Civil and Safety Engineering, with target in occupational health & safety, risk management and industrlal hygiene. Is possible work with you, if you are interested.

Antonio Dickson Sobrinho

Hy,

I am Master in Environmental Engineering and PhD student in Safe and Health Occupational Engineering at Porto University. My Doctoral Thesys is about I4.0 and risks. I`d like change informations about your research if you are interested, we can exchange information. My personnel email: [email protected]

Pascal Lafaye

Bonjour, mon activité est dans l'accompagnement des entreprise sur la prévention des accidents du travail. Mon champs de spécialité sont les facteurs humains et les erreurs ou non-conformités. Je travaille sur l'attention cognitive et l'analyse des risques qui préviennent les écarts.

J'ai travaillé sur cette étude : Epidemiology of sport climbing injuries caused by a climbing fall among climbers of the French Federation of Mountain and Climbing

Si je peux t'apporter de l'aide j'aimerai en savoir plus sur ton article.

Luis Lopez-Mena

This is a fairly broad proposal. I have been working with the knowledge and scientific methodology of behavioral psychology applied to job safety for a couple of decades with success. I developed two behavioral safety methods currently applied in various companies in several countries. What is the orientation of your paper? Greetings from Chile.

Borys Bolibrukh

Good day. I work in the field of human safety at work and in extreme conditions and I am a professor of the Department of Civil Safety at the National University "Lviv Polytechnic" Ukraine. What you are interested in. How can I help?

Muhammad Ali Shingirayi Chimbodza

Pascal Lafaye Luis Lopez-Mena Borys Bolibrukh Kindly share your email Id on my mail, So I can share detailed research work with you.

Email - er.shatrudhanp@gmail

Kah Choon Ng

Hi Dr. Pandey,

I am from Malaysia and interested to work with you on this project. Feel free to contact me or via email: [email protected]

Ali Abdulridha Shalash

I have the honor to cooperate and work with you in the research of spinal cord injuries, accident injuries, patient safety or occupational safety with appreciation and respect

Rui Dias Nogueira

Hi!

Due to my area of professional activity, I will be able to collaborate.

Can you please contact me in this regard.