I am doing parametric analysis. Well i got the solution of all three parametrized values. How I can visualize for all the solutions. Visualization of model analysis is showing only first parameter. Is their any option to view model output one by one.
There is a tick box for each design point in the parameter set. This needs to be ticked before you run to make sure all the data from each run is saved. Then to view each set of results right click on the design point and select 'set as current' . The displayed results will correspond to which ever design point is current.
You can take figure for each parameter and you obtain a report for all parameters .
Hi Nishant, please go through the following links:
https://www.ozeninc.com/parameterize-everything-ansys/
https://www.youtube.com/watch?v=zNA6FBUsT90
There is a tick box for each design point in the parameter set. This needs to be ticked before you run to make sure all the data from each run is saved. Then to view each set of results right click on the design point and select 'set as current' . The displayed results will correspond to which ever design point is current.
- Badges
- Science topic