03 February 2023 1 6K Report

In laser drilling of silicon, I would like measure the HAZ around the drilled hole in simulation. It is easy to find out in the experiment as I can measure dark colored region. For metals, it is easy to find out HAZ as they have a range for recrystallization temperature. But I am not sure for semiconductor and ceramic materials.

Please share if you have any experience.

More Dileep Karnam's questions See All
How to identify coffe planatation in LULC using GEE supervised classification ?

can we use thresholds ?

12 February 2024 7,207 0 View

What are the potential barriers and enablers of community based first responders of post crash??

what are the potential barriers and enablers of community based first responders of post crash??

01 September 2023 6,293 0 View

How should I prepare the standards for analysis of chromium in AAS? Should I use my background electrolyte or water?

I have conducted experiments to study specific adsorption of chromium in various soils and I made my all solutions of cr with using 0.01M NaNO3 as background electrolyte. (I made solutions of 5...

10 June 2023 9,619 2 View

Why background electrolytes are used while performing adsorption experiments?

I am performing batch experiments to study specific adsorption of heavy metals in soil. For that why do I need to add any background electrolyte in that. I mean I have searched but the description...

02 June 2023 1,679 3 View

Please see the description. How to convert this ppb to mg/kg of soil?

I digested 0.25gm of my soil sample and then made final volume to 50ml using di water. Then I further diluted this by taking 7.5ml of this and made volume to 15ml. I got 10.5ppb as reading in...

01 June 2023 8,991 6 View

How to control the drilled hole diameter (~100um) while polishing for viewing cross section?

Hello, I would like to know if anyone has a better idea to control the polishing depth of drilled hole diameter. Because, the hole disappears when I polish more. It is really difficult to find the...

30 November 2022 3,369 9 View

Which is the most influential parameter of weld bead in laser welding simulation?

I would like to know which is the most influential parameter of the weld bead (especially penetration depth) in laser welding simulation(irrespective of joint type)). How?

09 December 2021 6,984 34 View

Regarding Project/Research work selection for Master's in Earthquake Engineering?

Dear all, This is Dileep Kumar Chandragiri, Did my Masters in Structural engineering from NIT Allahabad, India in the year 2007. I have around 14+ years of experience as a structural engineer in...

08 September 2021 4,208 3 View

What are possible reasons for not getting exact molecular Mass of protein in mass spectroscopy (MALDI)?

I'm purifying a protein using bacterial expression system. Purification is done using affinity chromatography. While on the SDS PAGE it shows band at expected mass (17 kDa) but molecular mass...

25 June 2021 7,976 2 View

Are there any toolboxes available to apply time varying subspace and Time varying ARMA methods of system identification on experimental data?

I am facing problems to applying these methods algorithmically in languages like python and MATLAB . I was wondering if there is any routine or dedicated toolbox for time varying system...

05 May 2021 6,213 1 View

Similar questions and discussions
Using OBD technique i am trying to measure laser induced shockwaves velocity i found that at start velocity increases and then decay?

i am unable to interpret why its increases in start as shown in figure

11 August 2024 2,179 1 View

Hello researchers Is this a random laser or just fluorescence?

I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.

09 August 2024 9,894 2 View

Could dyes amplify the spectrum of light to a specific wavelength?

I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...

05 August 2024 3,290 1 View

In the presence of VERY high concentration (1000 ppm) of silicon, the adsorption isotherms of arsenic are showing anomalous trends, why so?

I conducted an adsorption experiment of arsenic on soil in the presence of different doses of silicon as competing ions to see the effect of silicon on arsenic adsorption and desorption. I took 5...

03 August 2024 6,500 3 View

How should operational parameters be selected when developing a pore-free laser welding technology?

There are three operating parameters - the laser power, the diameter of the focus spot and the scanning speed. It is necessary to obtain a seam of a given depth without pores. What parameter...

27 July 2024 7,168 2 View

Can we fit a gaussian Fit on a LIBS Peak ?

Though much literature suggests fitting a Voigt profile on a LIBS peak, is it also possible to fit a Gaussian profile on the LIBS peak? I have 204 spectra files, and I am building a pipeline for...

23 July 2024 6,127 1 View

How to download free version of BiofilmQ ?

I would like to use biofilmQ to analyse confocal laser image, how can do?

16 July 2024 7,628 2 View

How to install Quantum Espresso with Intel compiler ?

Hello ! I would like to do band structure calculations of perovsikites materials with quantum espresso. For this I installed the Intel Fortran compiler. This is what I get when I run the...

08 July 2024 1,207 0 View

How to add a mass source term in the continuity equation?

Hi, I am trying to model laser cladding in Ansys FLUENT. There are two phase: one is base metal surrounded by an inert gas (shown in the image). I want to add a cladding layer of the same metal....

07 July 2024 1,182 8 View

What is the best software for simulation of mode locked diode laser?

Hi Dear All I would like to simulate a mode locked semiconductor laser. Does anyone know what is the best software to do it?

06 July 2024 1,648 4 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close