Dileep Karnam

4 Questions 5 Answers 0 Followers

Questions related from Dileep Karnam

How to specify HAZ of laser drilled Silicon in simulation?

In laser drilling of silicon, I would like measure the HAZ around the drilled hole in simulation. It is easy to find out in the experiment as I can measure dark colored region. For metals, it is...

03 February 2023 6,245 1 View

How to control the drilled hole diameter (~100um) while polishing for viewing cross section?

Hello, I would like to know if anyone has a better idea to control the polishing depth of drilled hole diameter. Because, the hole disappears when I polish more. It is really difficult to find the...

01 December 2022 3,392 9 View

How to differentiate between the laser parameters of laser machining and laser shock peening?

I would like to know how to differentiate between the laser parameters of laser machining and laser shock peening? Because, I almost find same laser parameters(Avg.Power/pulse energy, Pulse...

27 June 2022 9,374 0 View

Which is the most influential parameter of weld bead in laser welding simulation?

I would like to know which is the most influential parameter of the weld bead (especially penetration depth) in laser welding simulation(irrespective of joint type)). How?

10 December 2021 7,006 34 View