How i have to give values for electrodes
This problem is due to incorrect meshing
Is it possible to quantify the flow without adding any polymeric beads? I'm interested to know whether there's dominant capillary or Marangoni flow. Aby suggestions would really be helpful.
05 May 2024 2,233 5 View
We want to do in-vitro glycation studies on human glycated albumin by combining human serum albumin and glucose. May I know if there is a way to have fluorescence labeling for HSA and Glycated...
01 June 2023 9,223 1 View
Human urine contains 97-98% water, and the rest is of proteins, ions, urea, creatinine, etc. What does the urine's zeta potential value of around -14 mV mean?
10 February 2023 5,429 3 View
Lets assume there are two different sets of time series sampled at the same time instants. These two series have different scales and units of measurement. Now I want to know how similar the...
26 September 2018 8,344 8 View
1. I need a procedure for adsorption of metals by the effect of ph, time, concentration of adsorbent and adsorbate. 2. Then the detailed procedure for langmuir and freundlich isotherm test. 3. How...
05 June 2018 9,716 8 View
I have two frequency spectrums as shown in the attached picture. The shape of the peaks are similar but they have only slightly shifted in frequency. I want to match the frequencies with similar...
21 November 2017 9,837 1 View
Specifically looking for a free online platform.
25 July 2016 3,816 28 View
i am trying to simulate cmos inverter using silvaco tcad but i am not getting. can anyone provide sample code for this?
01 January 1970 176 2 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...
30 July 2024 942 2 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...
26 July 2024 7,542 4 View
Hello, I'm newbie to TCAD. I wanna calculate Breakdown Voltage of AlGaN/GaN HEMT. But, my code shows just saturation. Could you please help me how to simulate Breakdown Voltage of my code? And...
25 July 2024 3,738 1 View
As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...
24 July 2024 6,930 1 View
I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?
23 July 2024 5,776 2 View
I have attached the charging curve from the battery tester for review. I need help on what is happening
21 July 2024 6,898 2 View
