How to select circular or irregular surface in abaqus for choosing master of slave surface ?

More Ashish Gupta's questions See All

I have modelled plate anchored bar for pull-out testing in abaqus. Warning file is attached. Please help me. Thanks in advance ?

Test description: There is a concrete cube in which hole is made for plate as well as for bar. Plate and bar is assembled. Static loading is given. Loading is displacement type. Meshing is C3D10R.

11 December 2016 1,913 3 View

"Too many attempts made for this increment", please anyone help me to solve this problem. I have attached screenshot of error file and warning file ?

Abaqus

10 November 2016 1,273 35 View

For pull out testing in abaqus, which is better: direct embed of reinforcement in concrete or to cut a proper hole in concrete and then embed ?

concrete, pullout test, FEM, Abaqus

10 November 2016 8,057 12 View

Can solid stirrup be used in abaqus modelling for beam-column joint?

FEM Modelling, Abaqus

09 October 2016 420 7 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How to get moment output in Abaqus Standart?

I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...

08 August 2024 4,831 4 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

Raafat E S Ismail

frist you make set (node type) for desired surface

then in constraint when asking you about master or slave you select the predefined set

Hussam Ali Mohammed

Please check references below.. hope it will be helpful for you… Regards…

http://www.byggmek.lth.se/fileadmin/byggnadsmekanik/education/courses/optional/VSMN30/ABAQUS_tutorial.pdf

https://classes.engineering.wustl.edu/2009/spring/mase5513/abaqus/docs/v6.6/books/usb/pt01ch02s03aus18.html