10 April 2025 0 4K Report

I would like to export the raw spectra from the Omnian software using a Panalytical XRF, but I could not find out how to do this. I was only able to copy the graphs or export the analysis results. Is it possible to get just the raw scan data? Thanks.

More Ryan Thompson's questions See All
How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How to completely dissolve soy lecithin?

Hello, I'm looking to dissolve soy lecithin in order to create a liposome. I've tried using various solvents like pure ethanol, methanol, and a mixture of ethanol and methanol but they didn't...

02 August 2024 6,980 4 View

Have you heard about Technological Surveillance on Oceanographic Research Vessels?

It is important to highlight that technological surveillance on oceanographic vessels is a collaborative effort in which different specialists work together to effectively leverage technology in...

31 July 2024 1,633 0 View

Why can't we get on top of this incubator infection (fungal)?

We have been experiencing repeated what looks very much like fungal contaminations in several incubators (in the same lab). We have tried the following repeated times and yet the coating on all...

02 July 2024 6,375 2 View

Publication duplicating concers?

Dear All, I found a paper related to my work. I will do the same thing except I will change the reagent they use. For example, instead of using reagent X, I will use reagent Y. They use gold...

25 June 2024 5,799 0 View

What learning analytics model is the best when it comes to improving student performance under any condition?

There is research into the models individually, but not one seeking to find an overall best one suited for any condition.

23 June 2024 5,641 3 View

Can i use polystyrene as a matrix in a hybrid COMPOSITE?

fiber powders will be used as a reinforcement.

23 June 2024 10,027 3 View

About mineral exploration?

Are there any techniques at ore exploration that could replace the compass-tape measure of mineralized structures?

14 June 2024 3,254 2 View

How can I purify filamentous fungi from leaf tissue?

I want to perform PacBio RNA-seq of a filamentous fungal isolate during multiple infection time-points in barley leaf. I was told that PacBio RNA-seq would not be viable due to the low...

12 June 2024 4,027 1 View

How to set the background of plot to white color in Silvaco Tonyplot?

Figure 1 is my plot, the background will be colored when the quantity is set to electron concentration. While Figure 2 is the figure i want. How to set the background to white color when the...

11 June 2024 8,621 1 View

Similar questions and discussions
Hello researchers Is this a random laser or just fluorescence?

I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.

09 August 2024 9,894 2 View

I need JCPDS file of LSFCO nanomaterial. Can anyone provide me?

Require for Rietveld refinement in XRD.

08 August 2024 3,081 2 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

Weak DAPI staining after immunohistochemistry - how to improve?

After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...

05 August 2024 9,637 2 View

How to fix background error in rietveld refinement of one XRD peak using GSAS-II?

I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II

05 August 2024 5,291 2 View

How to set the environment variable for incorporating the GD3 dispersion in G16 for performing calculations using the OPBE functional?

I have incorporated the dispersion effect for the OPBE functional by specifying the S6, SR6 and S8 parameters for GD3 in Gaussian G09 package. For this purpose, I have defined the environment...

05 August 2024 1,494 2 View

Are there any commercially available Donkey anti-Alpaca secondary antibodies?

Are there any fluorescently labeled anti-Alpaca secondary antibodies raised in Donkey? So far I have only been able to find anti-Alpaca secondaries raised in Goat. Or is this not possible due to...

04 August 2024 4,255 1 View

Why results of ROS flurescence are negative as there was no bacteria within?

Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...

04 August 2024 5,974 3 View

How to calculate the molar proportions of the oxides from the XRF analyses?

How to calculate the molar proportions of the oxides from the XRF analyses?

02 August 2024 2,565 2 View

Hello, regarding Mxene 2D titanium carbide?

I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.

02 August 2024 6,789 4 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close