How to protect polished sides of the internal reflection elements (for ATR-IR) during wet chemical deposition?

24 January 2018 1 2K Report

Most of the chemical deposition baths also requires more than room temperature , I was wondering how practically one can protect the polished sides while also exposing the top surface to the chemical deposition bath. ( ATR-IR, infrared spectroscopy, spectroelectrochemistry.

Abdelhalim abdelnaby Zekry

Dear Recep,

you can use adhesive film (Tape) to prevent the exposure of the surfaces from deposition.

Best wishes

More Recep Kas's questions See All

How can I find the "sodium pentaborate refractive index" number or does anyone know?

28 November 2022 8,501 0 View

What does it mean that the factor of safety is less than unity in safety analysis but the soil does not collapse ?

Hi, In a deep excavation analysis in Plaxis, safety analysis with phi/c reduction reaches the value of less than unity as the factor of safety but it does not fail. How this may be possible and...

10 January 2022 8,712 7 View

What are the performance indices that are used in demand side management and demand response?

Demand Side Management is one of the key tools in smart grids. It is aimed to control and manipulate of the demand by DSM. Demand response programs in DSM provide an option to control and manage...

12 December 2021 9,305 4 View

Sound velocity measurement setup for glass samples?

Dear all, I'd like to supply a sound velocity measurement setup for the synthesized glass samples in our lab. For this, is there anyone who can help me to find out a supplier? Also, any example...

06 December 2021 1,609 3 View

Recycling and/or reusing of display glass? Any statistical data?

Dear all, As we all know that the rate of using display technologies has been soaring up with each passing day. The need for glass materials for display devices such as smartphones, touch...

06 December 2021 6,082 3 View

Is it not the correct way to investigate different glass types, as well as various oxide contributions in terms of theoretical radiation shielding?

Dear All, I'd like to share my experience with our manuscript (theoretical concept) reviewing process. Currently, we are studying radiation shielding materials, particularly glass substances. The...

21 September 2021 4,900 6 View

Can we predict the colorization/decolorization of a radiation shielding glass after exposure to the radiation source?

Dear all, I'd like to ask about the colorization or decolorization of a radiation shielding glass material after exposure to the different energy levels. As far as I see from some literature...

11 July 2021 2,653 8 View

Platinum crucible cleaning after melting activity?

Dear all, I'd like to learn about platinum crucible cleaning after melting activities. What is the alternative agent except for HF to clean out the crucible? If this agent does not take so much...

30 June 2021 6,880 5 View

Is it possible to neutralize (as possible as it can) the color hue resulted from PbO content in lead-based glass systems?

Dear All, In lead-based glass systems, there naturally occurs a brownish color in the glass body. Similar to the decolorization of iron oxide in the soda-lime-silicate glass system (use of cobalt...

31 May 2021 5,953 3 View

What is the limit of boron oxide (B2O3) usage in a B2O3-TeO2 glass system for not encountering the phase immiscibility?

Dear All, For understanding the phase immiscibility, I have searched for the related amounts of each content. I have found some studies indicating the limit of B2O3 as 25 mol%. However, I have...

19 May 2021 4,094 2 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

How to heat polymer for about 130° without oil bath ?

is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it

06 August 2024 947 1 View

How can I find access to heavy metal reference doses from the EPA and WHO websites?

Reference dose and Maximum acceptable concentrations HMs

03 August 2024 8,230 4 View

Best mask design for metal deposition aiming build a Perovskite solar cell device?

What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?

31 July 2024 4,835 3 View

What is the best method to detect the chemical composition of pollen ?

I have multiple small samples of grass pollen with anthers. I want to find a method to identify concentrations of proteins, lipids, and other various elements for these samples. any suggestions?

28 July 2024 5,331 1 View

Hi dear researchers, do you suggest the best and shortest path for chemical synthesis and green synthesis of magnetite(Fe3O4)?

Suggest the best and shortest route for the chemical synthesis and and green synthesis of magnetite(Fe3O4) The chemical synthesis should contain the least dangerous chemicals along with full...

21 July 2024 2,476 2 View

Seeking latest research on social protection in northeast Nigeria, Yobe state. How does it compare with other states?

What has been the social protection outreach like in Yobe state. Which areas are challenging for the government departments and what capacity building would be most effective? Comparison of the...

21 July 2024 9,887 1 View

Why do fish have fishy odors naturally ?

Chemical Engineering /Food Engineering

20 July 2024 4,152 4 View

What should be consider when do CVD?

I'm trying to create a new substance. Are there any important considerations when fabricating with CVD? For example, lattice constant If you have any such considerations, please let me know.

15 July 2024 9,359 0 View

Is there any possible explanation for the statement written below?

Low magenic concenrartion indicating enhanced chemical weathering associated with warm and wet climate in detrital sediments.

14 July 2024 1,381 4 View