02 November 2021 3 3K Report

I would like to know how one can perform BET analysis of Boron Phosphate.

More Ümran Aşçı's questions See All
Hello, the PSS we use for polymerization caused shrinkage on the material. What would you recommend to prevent this?

pedot, pss, conductive polymers

19 May 2024 4,826 2 View

Are there any studies on the influence of electrospinning parameters on TGA analysis results of the nanofibers?

I am looking for studies that investigate the effect of electrospinning parameters (solution and process parameters) on the thermal stability of nanofibers. Generally, the effect of nanofiller...

19 January 2022 1,888 7 View

What is the best way to calculate porosity of nanofibers?

I am curious about how to calculate nanofiber porosity from SEM images.

01 November 2021 3,070 9 View

How to prepare a solution for GPC analysis?

I am looking for solution preparation methods for GPC analysis in order to find out the molecular weight of PLA. For the analysis, THF is used but I can't solve PLA in THF.

01 November 2021 2,021 10 View

Are there any studies on electrospinning of neat PEG?

I am looking for studies on neat PEG electrospinning. Generally what I found is electrospinning of PEG with other polymers or nanomaterials.

17 October 2021 2,074 5 View

Reasons for obtaining films instead of nanofibers after electrospinning process?

What could be reasons for obtaining films instead of nanofibers after electrospinning process like the one in the attachement?

22 September 2020 1,794 14 View

Detection of DNA Damage in proliferating cells?

I want to detect that my proliferating cells underwent a DNA Damage after treatment with drugs. I already know the H2AX method but looking for other methods. Many thanks in advance!

16 August 2020 4,285 6 View

Is it better to use anhydrous solvents for electrospinning process?

I wonder whether it is better to use anhydrous solvents for electrospinning process or not. In addition, what is a good alternative for electrospinning of PLA instead of 1,4-Dioxane in terms of...

03 May 2020 9,915 2 View

How can I prepare PLA (poly lactic acid) solution for electrospinning?

I've used Chloroform/DMF binary solvent system to dissolve the PLA at different concentrations. However, I've experienced clogging and multijet at the tip due to the fast evaporation of the...

02 February 2020 5,657 7 View

Do anyone want to write a common article about systems thinking or strategic thinking?

A cross cultural study for example.

10 December 2018 8,599 5 View

Similar questions and discussions
Whether i can preserve leaves samples in 2.5% glutaraldehyde in 0.05 M phosphate buffer, pH 7 for coming several weeks for further LM study ?

I want to preserve the sample leaves for the LM study of the stomata and conidia analysis. Whether 2.5% glutaraldehyde in 0.05 M phosphate buffer with pH 7 can be applied for preservation.

29 July 2024 8,560 0 View

Why specific capacitance is not proportional with the specific surface area?

Dear researchers, Why specific capacitance is not proportional to the specific surface area? I have material A with a surface area higher than material B, but material B is showing little bit...

26 July 2024 9,156 2 View

What is the degassing temperature and time for biochar for BET surface area analysis if TGA is not possible?

Since BET and TGA both are very costly instruments and many places the facilities are not available (for large number of samples) hence a threshold degassing temperature and time is preferable

16 July 2024 8,112 2 View

What can be done when electronic minimization does not converge during geometry optimization in CASTEP?

Hello All, I've been facing difficulty in executing geometry optimization of a sodium polyanionic phosphate (Na4Fe3P4O15) crystal in CASTEP (please find the input and output files attached). When...

07 July 2024 8,626 2 View

How to know if the oil palm tree is functioning properly in terms of absorption of different nutrient?

The idea is to design an IoT system that is able to capture real-time conditions from an oil palm tree to ensure optimal growth. Nutrients such as Sulfur, Nitrogen, Boron, Zinc, Copper and Iron.

30 June 2024 3,046 2 View

Why does a nitrogen adsorption-desorption isotherm form two loops?

BET analysis

27 June 2024 6,964 1 View

Can I directly ligate Illumina adaptor to the end of ssDNA?

I have a sequence of ssDNA that I would like to directly ligate an Illumina sequencing adaptor to. As long as I have done the end repair (remove phosphates), can I directly ligate the adaptor to...

26 June 2024 4,522 0 View

Initial and final setting times of a calcium phosphate cement?

I'm measuring the setting time of a calcium phosphate cement using an apparatus that records how much resistance a needle (connected to a load cell) encounters over time. This process provides...

24 June 2024 7,534 5 View

Ni-NTA protein purification - how to obtain higher yield concentration?

Hello, I am trying to purify a 6X-His tagged protein using Ni-NTA chromatography. However, I obtain very less yield & concentration; and considerable protein in load flow through. Any...

16 June 2024 5,876 5 View

Why after DFT energy calculation in dmol3 materials studio 2023, it does not give me the outmol file?

I used material studio app dmol3 module for geometry optimization for a nanotube, and then I calculated its energy, for some of gas phases and I actually had the outmol file which allows me to...

14 June 2024 5,636 0 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close