04 April 2018 3 6K Report

Hi,

Can any one suggest how to model the URM walls using Staad Pro or Midas Gen?

Considering equivalent strut (diagonal) which remains open under tension that is known. But how to model that using Staad Pro or Midas gen?

Can any one show the modelling steps?

Regards-

More Debabrata Podder's questions See All
Buckling analysis of a cylindrical shell in Ansys APDL?

In Ansys APDL, We are trying to validate our shell model for nonlinear buckling analysis considering the initial imperfection (as given by Ahmed et. al.) We have attached our results as attached....

13 February 2021 9,200 5 View

In Ansys APDL the stiffened plate girder is not getting meshed after gluing! What to do?

This is a model of a stiffened plate girder. The APDL code is provided below for its geometry generation. It is not getting meshed after gluing all the volumes. If the volume is subdivided in the...

18 January 2021 4,839 4 View

What is the advantage of nanostructured ZnO thin film over continuous ZnO thin film for optoelectronic application?

What is the advantage of nanostructured ZnO thin film over continuous ZnO thin film for optoelectronic application?

30 December 2020 9,422 2 View

Collaborating VS contributing Authorship?

Can you help me to understand the significance of the difference between collaborating and contributing authorship (eg, GBD)? Do they put similar weightage to University applicant assessors?

29 October 2020 4,443 3 View

Code of alexnet in jupyter notebook?

Can anyone provide the full python code for implementing alexnet models in COVID-19 XRAY image dataset?

06 September 2020 3,416 3 View

Code of dense net in python?

Can anyone provide the full python code for implementing different dense net models in COVID-19 XRAY image dataset?

31 August 2020 2,073 3 View

Code of inception net in python?

Can anyone provide the full python code for implementing inception net in image dataset

30 August 2020 7,903 1 View

How to find out the valence band conduction position of oxide semiconductors?

I need to find out the energy levels of valence band and conduction band in case of oxide semiconductors. I want to know about the technique used to do that along with the measurement procedure.

06 July 2020 1,950 9 View

Can Anyone kindly explain how to apply PSO algorithm to find the centres in the hidden layer and to update the weights in RBFN network using MATLAB ?

how to do clustering just like K-means algorithm to find out the optimized centres for each hidden layer node in RBFN neural network and to update the weights for data classifiacion

15 January 2020 7,351 2 View

Does publishing articles as a Grey literature counted as a publication in academia?

I write evidence summaries for a renowned institute which makes me an author for every summaries. When I contacted team, they informed that it is a grey literature. I wanted to know if I can count...

17 July 2019 2,532 5 View

Similar questions and discussions
What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

How to repeat an operation on an atom selection for multiple times in PyMol?

Hi, I am trying to construct a multi-layer fibril structure from a single layer in PyMol by translating the layer along the fibril axis. For now, I am able to use the Translate command in PyMol...

02 March 2021 4,569 4 View

Shall I skip the measurement model in SmartPLS?

Hello everyone, I had run a mediation model in SmartPLS using questionnaires that were already validated among my statistical population. A professor who edited my paper -though she is not...

01 March 2021 3,052 3 View

What is involved in morphological changes of SEM images of a substance?

In the sem analysis of CaCO3 nanaoparticles, the morphology images showed spherical shaped particles but the proposed morphology for these type of nanoparticles is trigonal. I prepared the...

01 March 2021 1,960 4 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

Does the circuit modeling for planar monopole antennas using Foster canonical forms give good approximation?

Hi researchers, I am searching for some accurate way to do the circuit modeling of planar CPW-fed monopole antennas. I have gone through the literature where mostly circuit modeling is done using...

28 February 2021 7,016 1 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close