I desire to use to simulate common household material t look into their filtration efficiency of aerosol particulates at 3 micron meters... being relatively new to the software, I have been able to import different designs I have designed in solidworks and I am currently having difficulties in setting up the model it self and define these as porous medium in ANSYS FLUENT. Any guidance and suggestions?
Добрый день, коллега! Я могу порекомендовать одну статью для ознакомления. Прочитайте статью " Development of the calculation method of polymer compound mass to be applied onto the textile garment pieces" сборник
Aegean International Textile and Advanced Engineering Conference (AITAE 2018)
IOP Conf. Series: Materials Science and Engineering 459 (2019) 012067 IOP Publishing doi:10.1088/1757-899X/459/1/012067
Thanks for your replies. I managed to develop a model consisting of a squared pipe caped by the textile material at the outlet. I also successfully conducted a CFD simulation with air as fluid. I would like to create an aerosol deposition for which I realize I have to mix air and water liquid... Any guidance?
- Badges
- Science topic