I want to have galvanostatic charge discharg curves at specific potential window with biologic (SP-200) for 3 electrode system. Does anyone know what should I do?
Hello, I'm looking to dissolve soy lecithin in order to create a liposome. I've tried using various solvents like pure ethanol, methanol, and a mixture of ethanol and methanol but they didn't...
02 August 2024 6,980 4 View
it's my first time using NVivo software.
01 August 2024 9,304 5 View
I have collect a LSV data by taking SCE as the reference electrode. But I want to convert this one to Potential with respect to Reversible Hydrogen Electrode. Please suggest me the required...
13 July 2024 7,841 2 View
I'm using Dorsomorphin (C24H25N5O) as one component in dual SMAD inhibition of pluripotent stem cells to differentiate into neurons alongwith SB431542. Now as to solubilizing 10mg SB in DMSO for...
11 July 2024 4,832 0 View
What's your suggestion for converting a heavy organic alcohol to its corresponding acid (via oxidation or dehydrogenation)? Your industrial experience is appreciated.
12 June 2024 3,862 3 View
Is it a source for moisture factor in different plants? I need to find moisture factor (oven dry weight / wet weight) in plants in different studies.
10 June 2024 842 0 View
the autoclave has been smelly and seem likely yellow after my synthesis and this changes may effected on other synthesis, so I want to clean PTFE from all sulfur contamination that remain on...
31 May 2024 2,985 0 View
I have a lipopeptide solution that I intend to lyophilize in a few days. Should I put it in the -20 freezer or -80? Which temperature is best for maintaining its properties?
20 May 2024 3,893 0 View
Dear researchers, I'm currently conducting a direct cyclic fatigue simulation in Abaqus, but I'm encountering difficulties in analyzing the results. Despite the simulation running, I'm struggling...
04 May 2024 6,957 2 View
Hello. My polyacrylamide gel becomes cloudy after de staining with a solution consist of (50% miliQ water + 40% methanol + 10% acetic acid) and the background of my gel does not become completely...
02 May 2024 895 2 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...
30 July 2024 942 2 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...
26 July 2024 7,542 4 View
As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...
24 July 2024 6,930 1 View
I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?
23 July 2024 5,776 2 View
I have attached the charging curve from the battery tester for review. I need help on what is happening
21 July 2024 6,898 2 View
I want to know that n-doped side of solar cell is connected with positive or negative electrode.
20 July 2024 1,348 2 View