What is the most reliable source to get Impact factor of journals?

Source to get Impact factor of journals

01 March 2021 6,654 2 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

Stress/strain tensors decomposition ???

25 February 2021 6,760 1 View

Best FE Program for Concrete Strengthened with FRP Sheets?

Colleagues, I have been using ANSYS to model concrete strengthened FRP sheets, but less than happy with it. Any has recommendation for efficient, easy to use FE program for modelling concrete...

22 February 2021 7,528 3 View

Any information about dinitrosalisylic acid reagent end point color stability ?

I work on estimation of alpha amylase activity using dinitrosalisylic acid reagent If i put the reagent to stope the enzymatic reaction and allow the reagent to react with the produced reducing...

17 February 2021 7,402 4 View

Using liquids as superstrate in Fabry-Perot Cavity Antenna?

Hi, A Fabry Perot Cavity allows to increase the directivity of a low gain antenna by putting in the top of cavity a superstrate with high permittivity such as a ceramic (er=10.2). However,...

09 February 2021 6,799 8 View

Experiment statistical analysis?

07 February 2021 3,635 3 View

Distribution of modes fields ?

Hi, We find a specific distribution of electric fields in structure for different frequencies which can be seen using em solvers and known as modes. I would like to know how we can choose the...

04 February 2021 10,043 3 View

Greetings Doctors, If i did a same experiment for a 2 populations and i need to publish this work in a 2 different papers?

If i did a same experiment for a 2 populations and i need to publish this work in a 2 different papers can i use the same word in the writing of these 2 papers or this would considered as...

04 February 2021 4,648 4 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

What are some common oxidants used to oxidize iron sulfur clusters in proteins for techniques like EPR?

I have used potassium ferricyanide (which is likely the most common) extensively in the past, but I am curious to know if there are other oxidants that work well. I need to generate the oxidized...

29 January 2021 9,803 4 View

Rhodanese enzyme assay using salt potassium ferricyanide?

I wanted to perform rhodanese enzyme assay using salt potassium ferricyanide (K3Fe(CN)6). The assay is based on the products formed in the reaction but I can't get the reaction i.e what product...

26 January 2021 8,044 4 View

How can I discolor solution inside Ag/AgCl reference electrode?

Recently, I am using Ag/AgCl as RE in a basic three-electrode system to scan CV in K3Fe(CN)6/ K4Fe(CN)6. I realized that the color of the solution in RE changed from transparent to yellow. Can...

25 August 2020 6,254 7 View

How to increasing OCV of micro-Microbial Fuel Cells?

Hello, I am working on double-chamber micro-MFCs. The OCV of the MFCs is really low, I saw max 30mV or near that value. How could I increase OCV? Will increasing the concentration of ferrocyanide...

26 October 2019 3,830 3 View

What could cause this side peak during Drabkin's Reaction?

Hey there, I'm using commercially available Drabkin's reagent to measure the hemoglobin content of blood photometrically. The reagent I bought contains sodium bicarbonate, potassium ferricyanide...

09 October 2019 1,497 10 View

Proper electrolyte for silver nanocomposite electrode?

Hi all, I'm trying to use silver nanocomposite(Ag nanoparticle + acrylated polyurethane based resin) as a electrode for electrochemical sensing. So far, our team has used Potassium Ferricyanide...

17 September 2019 9,430 1 View

Electrochemical ratiommetric method?

Can a ratiommetric method be used to determine a non-electroactive substance? If with increasing the concentration of analyte, both the peak current of the ferricyanide ions and the manganese...

16 September 2019 6,629 1 View

Electrochemical ratiommetric method?

Can a ratiommetric method be used to determine a non-electroactive substance? If with increasing the concentration of analyte, both the peak current of the ferricyanide ions and the manganese...

08 September 2019 5,047 1 View

Is it safe to adjust the pH of a ferricyanide/ferrocyanide solution in PBS from 7.4 to 5 using HCL acid?

I have a ferricyanide/ferrocyanide (5mM: 5mM) solution in phosphate buffer saline with a pH of 7.4 that I would like to adjust to about 5. Is it safe to do this with a 0.5 M HCL solution or will...

06 July 2019 9,610 1 View