The structure I study is steel
I used PIPE288 and BEAM188 elements
When I want to get the values of the stresses
Ansys apdl displays the message
"S is an invalid label. The ETABLE command is ignored."
------------------------------------
et,1,pipe288
r,1,159e-3,2.5e-3
mp,ex,1,210e9
mp,prxy,1,0.3
mp,dens,1,7850
------------------------------------
et,2,beam188
r,2,0.00090321,3.75431e-7,3.75431e-7,62.5e-3,62.5e-3
mp,ex,2,210e9
mp,prxy,2,0.3
mp,dens,2,7850
----------------------------------
esize,,ndv
lsel,s,line,,1,29
sectype,1,pipe
secdata,159e-3,2.5e-3
secnum,1
latt,1,1,1
lmesh,all
-----------------------------------
lsel,s,line,,113,114
sectype,2,beam,ctube
secdata,52.5e-3/2,62.5e-3/2,12
secnum,2
latt,2,2,2,,,,2
lmesh,all
Any Help?
i think you should type /POST1, before getting any result data of this type.
for example:
/post1
PRNSOL,S,X !print nodal soluation,item is stress,component is X
Dear Claudio Pedrazzi thank you
I got the following results
SF:y, z Section shear forces
SE:y, z Section shear strains
TQ Torsional moment
SDIR Axial direct stress
SByT Bending stress on the element +Y side of the beam
SByB Bending stress on the element -Y side of the beam
SBzT Bending stress on the element +Z side of the beam
SBzB Bending stress on the element -Z side of the beam
This is done by using
etable, sdirI, smisc, 31
etable, sdirJ, smisc, 36
etable, sbytI, smisc, 32
etable, sbytJ, smisc, 37
etable, sbybI, smisc, 33
etable, sbybJ, smisc, 38
etable, sbztI, smisc, 34
etable, sbztJ, smisc, 39
etable, sbzbI, smisc, 35
etable, sbzbJ, smisc, 40
etable, sfzI, smisc, 5
etable, sfzJ, smisc, 18
etable, sfyI, smisc, 6
etable, sfyJ, smisc, 19
etable, tqI, smisc, 4
etable, tqJ, smisc, 17
How to Get Values Von Mises stress now?
- Badges
- Science topic
- Similar topics
- Biological Science
- Physiology
- Physiological Processes
- Stress