I have been working on the virtual RVE generation using Dream.3D for crystal plasticity-based numerical simulation on DAMASK. I have successfully generated multi phase RVEs with varying grain size and distribution of precipitate phase on grain boundaries.
Now I want see the banding effect of cementite particles in ferrite matrix (as in spheroidized pearlitic steels). For that I want to make Virtual RVEs with varying band width embedded in the ferrite matrix at specific gap.
Any software technique to make these RVEs e.g., Dream.3D, Neper or any other help or clue will be most appreciated.
Dear Muhammad,
I assume you are using the grid/spectral solver. If Neper or DREAM.3D do not offer the required functionality, you can use https://damask3.mpie.de/documentation/processing_tools/pre-processing.html#damask.Grid.add_primitive to add a second phase particle. If you loop over the position of the particles (using e.g. numpy.random) you should be able to create a banded structure of precipitates.
best regards
MArtin
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Materials Science
- Materials
- Inorganic Materials
- Metals
- Alloys
- Steel