I want to do plastic simulation. I have assigned Solid section and this is my element. C3D8T: An 8-node thermally coupled brick, trilinear displacement and temperature. I already got some result but its not satisfied.
1) I have to do in CFD ? but I cant find it. cause there is only 2 option
abaqus standard/ explicit model and
electromagnetic model
how can I do CFD analysis?
2) is CEL or SPH is good? which one is preferable for my process ?
Dear Jay Prajapati I think you can use Ansys software for CFD simulation.
Dear Jay Prajapati I think you can use Ansys software for CFD simulation.
thank you Ali Golbaf and Elmira Ghazanfari-Jajin for your comments. But I'm doing my research and the definition is specific. So I have to do in Abaqus. If you have any idea in Abaqus then just let me know.
In Abaqus 2016 there was option for CFD analysis but I'm using 2018 and in that there is not special option thats why I'm little bit confused. Anyways thanks for reply
sorry! I don't have information about CFD simulation in abaqus And usually used from ansys software. I'm interested in knowing more about this too.
Hi Jay,
did you figure this out? please share if you did. thanks
Amirhamed Bakhtiarydavijani Actually I got some expert answer that for plastic extrusion I dont need to use CFD. I can use ABAQUS explicit. And regarding CFD analysis if you want to do then you have to do either ABAQUS 2016 or CEL and SPH method. because this methods are used for fluids or Fluid structure interactions. I will post here right solution when I will finish mine.
dear jay. this link may be help you :
https://www.youtube.com/watch?v=t-RXKYDF0t8
use abaqus 2016 or older versions of it.
Hi
This link may help you.
https://www.simuleon.com/simulia-abaqus/abaqus-cfd/
- Badges
- Science topic