What are the advantages of LCL over LC filter and how to design LCL filter?
These articles may be useful for you.
I am simulating sensorless control of PMSM. I am giving constant theta at the starting time but my motor is not starting, what could be possible reasons?
08 September 2016 5,342 7 View
Hello researchers, I am implementing sensor less control of PMSM from estimated back emf technique. I am getting an angle in the range of o to 2*pi which is perfect, however when I try to convert...
05 June 2016 7,994 7 View
In closed loop system when i connect inbuilt universal bridge (MOSFET /DIODE) then my model is working perfectly and system is stable as soon as i connect 6 mosfet switches (bridge by mosfets) the...
11 December 2015 4,303 3 View
I am simulating my circuit at simulation time which is 1e-7 and my sample time for a part of circuit is 20e-6 sec. Why my result of overall circuit is affected by simulation time where i am...
10 November 2015 1,826 9 View
I am making a simulink model for three phase grid tied inverter. I have a few questions. Can you help me out? -At the summing point (Id-Iq*wl*Vd) and (Iq+Id*wl*Vq) I am getting very high value...
09 October 2015 4,233 4 View
I am simulating a three phase grid tied inverter using simulink. How do I find kp and ki parameters for pi controller for PLL, Id, Iq and Vdc . Is there any specific approach to get their values?
09 October 2015 7,434 0 View
The response of boost converter changes when I am trying to discretize simulink matlab model.I changed my compensator transfer function from s domain to z domain using c2d command.However after...
09 October 2015 1,117 2 View
I am modelling boost converter and using type 3 compensator. Inductor value of boost converter is very high which makes very low (right half plane frequency). Because of this problem I am not...
08 September 2015 6,165 3 View
I am trying to simulate interleaved dc dc boost converter in simulink and I am currently working on feedback part. I have designed the type 3 compensator for voltage feedback.After deriving...
08 September 2015 7,019 4 View
I am modelling boost converter for current mode control in simulink .How to decide the switching time and the values of slopes Se, Sn and Sf to generate compensation ramp reference for boost...
08 September 2015 8,262 0 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
How to use and this is economical?
06 August 2024 3,160 2 View
Please can anyone support with the survey questions based on RQ measures and propose how to do it in FMCG industry and include as well the role of brand equity Thanks
06 August 2024 949 0 View
How to design VN primer to attach with universal reverse primer
05 August 2024 2,116 3 View
I am analyzing cherts from different sources found within one specific geologic formation using ICP-MS/ES. My committee was asking this question about my analysis. I was not sure how to answer this
05 August 2024 7,902 3 View
I am currently researching the impact of environmental toxins on children's health and would greatly appreciate insights from experts in the field. If you are an expert or researcher working on...
02 August 2024 2,627 1 View
Hello! I have this scale which had 10 items initially. I had to remove items 8 and 10 because they correlated negatively with the scale, and then I removed item 9 because Cronbach's alpha and...
01 August 2024 4,606 7 View
In STATISTICA 13.3, I used the Experimental Design Builder under the Design of Experiments tab to generate a design matrix for an asymmetrical factorial design (1443) with 12 experiments. However,...
29 July 2024 4,155 2 View
Employing a pragmatic inquiry research design, looking for published research using this method, employing qualitative research data collection methods of semi-structured interview and focus...
28 July 2024 540 2 View
The catalytic effect of retained austenite refers to the phenomenon wherein quenching steels with a small amount of retained austenite, when subjected to tempering at a specific temperature...
27 July 2024 8,508 0 View
