Is it possible to export mesh from abaqus for using in Ansys Fluent?

Hi everyone, I want to mesh a part in Abaqus for further use in ANSYS Fluent because this way, it is much easier and faster to get a high-quality mesh. Is it even possible to generate a file...

15 January 2021 5,665 3 View

What are the (extrinsic) factors that influence the citation rate of a research article?

Dear RG members, Excluding the (intrinsic) factors such as quality and content of an article, what are the extrinsic factors/predicors that influence the citation rate of a research article? Is...

07 January 2021 3,410 3 View

Natural frequency extraction with ABAQUS?

I have modeled the RC beam with simply supported BC and I have got the frequency value for the case of the beam, but I have 150 modes for each analysis and I have to see them one by one to find...

05 January 2021 8,626 3 View

How high is the saturation electric field of P-E loop in Relaxor Ferroelectrics?

I have prepared a relaxor ferroelectric (KNN - BZZ solid solution) bulk sample. During P - E loop measurements, we experienced saturation electric field of about 100 kV/cm before dielectric break....

29 December 2020 9,080 3 View

What is the best way to simulate the fractional controllers?

What software do you prefer?

29 December 2020 889 3 View

What is New Next Generation Attenuation Relationships (NNGAR) and how are they different from other attenuation relationships?

Dear researchers The provisions of ASCE 7-10 states that New Next Generation Attenuation Relationships (NNGAR) has been used in the process of Probabilistic Seismic Hazard Analysis (PSHA) to...

15 November 2020 1,132 4 View

Stiffness changes of the structures due to modeling P-Delta effects in Sap2000 are more significant than OpenSees. which is more accurate?

Dear researchers The modeling of P-Delta for the structural elements (specially columns) reduce the stiffness of the structure and consequently increase the period of vibration. Now, these...

24 October 2020 7,255 5 View

Why 256x256 medical image gives me 256x256x3 in matlab?

I need a 256x256 pixel image to use it in my project. I downloaded images from the internet, but when I read the image, it stored in a 256x256x3 variable (color image format PET images). the NSCT...

11 October 2020 686 13 View

What are your suggested topics for future research?

Hello to all professors and researchers, What is your suggested topic for conducting an academic-operational thesis in one of the most up-to-date and efficient fields? Please express your proposal...

07 October 2020 395 56 View

What has been the positive effects of Covid 19 virus on the world energy demand from your point of view?

Hi every one, The power consumption of servers, computers, and Internet networks may have increased due to the increased use of virtual platform-based systems. The transportation system...

05 October 2020 9,615 5 View

How to use measure capacitance change in COMSOL time dependent study ?

I want to measure change of capacitance due to relative displacement between two parallel plates in COMSOL. Distance between two plates changes with time. So I'm using a time dependent study but...

26 February 2021 8,567 3 View

How to find the capacitive response frequency from the impedance plot?

I have done electrochemical impedance by using cyclic voltammetry for one organic material. from that, I plotted bode diagram. but actually, I am very confused about how to find the capacitive...

18 February 2021 3,023 3 View

How to get better phase shift in C-V curves for ferroelectric devices?

I tried to sweep my ferroelectric devices from -2V to 2V and then from 2V to -2V and The two hysteresis peaks are off by several microFarads. Should i increase bias voltage? I am doing these...

16 February 2021 8,514 2 View

Will it be possible to get IC:50 if we target cancer cell line with antibody drug conjugate (ADC) that have 50% less antigen positive cells ?

Is it possible to attain IC50 if my target cells have less than 50% antigen expression ? For example: Cancer cell line XXX is showing 35% of expression of cell surface antigen YYYY, if i...

04 February 2021 2,711 3 View

Is it easy to handle discontinuities in objective function with mathematical optimization?

Mathematical programming is the best optimization tool with many years of strong theoretical background. Also, it is demonstrated that it can solve complex optimization problems on the scale of...

07 January 2021 8,757 22 View

How can we maintain the two different DC high voltages of same polarity between parallel electrodes inside the vacuum separated by few millimeter?

I am trying to maintain two different high DC voltages of same polarity (either positive or negative) between two parallel electrodes separated by 500 um inside the vacuum. However, what I found...

21 December 2020 1,735 3 View

How to segregate electrode-dielectric and dielctric-dielctric interface polarization after Capacitance VS Freq. measurement using impedance analyzer?

After measuring the capacitance vs frequency for my MIM capacitor consisting of alternate layers of TiO2 &Al2O3 , there is a rise in capacitance value of ~ 20-160 nF at 100 hz, starting to...

17 December 2020 7,786 3 View

How to fix ANSOFT Designer installation issue?

Hello everyone. I was trying to install the ANSOFT Designer SV2 on my desktop. Peculiarly, after 100%, the installation bar does not do anything. It just remains stuck (kindly see the attached...

28 November 2020 7,721 2 View

How to evaluate area under the discharge curve by using Origin software?

In case of Galvanostat charge-discharge, the discharging time used to evaluate the specific capacitance using following relation: C=I*t/m*dV. But when it comes to capacity, the area under the...

25 November 2020 1,856 1 View

How to structure a Knowledge Management model, to strengthen research and improve educational quality in higher education institutions?

22 November 2020 8,558 9 View