How to define a material as liquid in ANSYS MAXWELL?

28 July 2022 0 1K Report

Please have a look at the picture attached. I have modelled ionic liquid as a cone and I want to define it as liquid. Is there a way to do it in ANSYS MAXWELL or solidworks

Badges
Science topic

More Kushagra Kirtiman's questions See All

How to add Function load in ANSYS mehcanical APDL?

I am trying to simulate laser drilling I have put the following equation for heat flux. I have attached the screenshot of the solution that I got. It doesn't show me any temperature profile. I...

16 August 2022 842 0 View

Why I am getting low values of electric field?

I am doing ANSYS Maxwell simulation of Taylors cone with different materials such as PTFE, PEEK and Silicon. The electrostatic fluid used is EMI-BF4 which modelled as cylinder with Cone on top of...

27 July 2022 877 2 View

How to Gaussian heat source in ANSYS APDL?

I want to apply the following heat flux load to the metal of dimension 10x10x0.2 mm. Can anyone help me with this?

24 July 2022 9,788 0 View

How to add switch on feed strip of a microstrip patch antenna using HFSS software?

I am working on a 2x2 microstrip patch antenna design using HFSS software. I have completed the design of the antenna. I want to somehow add switches to the feed strip of each of the 4 individual...

23 November 2021 6,440 4 View

Is there any Open Source Simulator available for IOT in Agriculture?

Please tell me if there is any open source simulator available for IoT in Agriculture?

12 December 2019 5,435 3 View

Can anyone suggest a set of benchmark reactions containing oxy-hydrocarbons for testing new qm/mm system?

I want to standardize a method in gaussian. For that i am looking for a set of benchmark reactions which cover most possibilities like bond saturation, decomposition, deoxygenation,...

01 August 2018 4,964 3 View

Quaternions to euler frame?

Quaternions can be generated from euler angles (euler2quat) but I need to convert back to a set of euler angles for torque calculations. I'm having some trouble following online resources on...

26 February 2018 4,976 3 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

What is the solvent for 8YSZ nano material?

I need to do some experiment with it in liquid form.

07 August 2024 613 3 View

Hi, please what is the best tool on Aspen plus that can help me get the best inlet temperature and pressure for cryogenic distillation?

I am trying to recover liquid CO2 from a mixture of 0.6 CO2, 0.3 N2, and 0.1 O2. My aim is to recover about 99% liquid CO2 at the bottom of the column and make sure the amount of gaseous CO2...

06 August 2024 4,611 0 View

How much Yeast should we add to fermentation media?

I have prepared a liquid broth containing Yeast (S. Cerevisiae) that i need to add from it to fermentation media of lignocellulosic hydrolysate. I need to know based on what parameters do we add...

06 August 2024 662 1 View

What is the best protocol for freezing the rat brain in preparation for protein detection by Elisa ?

What is the best way to freeze the rat brain - liquid nitrogen, Dry ice , isopentane - after isolation for later protein investigation by Elisa?

01 August 2024 1,722 1 View

Tangential stiffness option in ansys workbench?

I am not able to find how I can provide tangential stiffness in ansys workbench The normal stiffness option is there. But how I can enter tangential stiffness I have read somewhere tangential...

29 July 2024 2,032 2 View

How to Import Blade geometry from CAD file in ANSYS design modeler?

Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...

27 July 2024 356 3 View

Element deletion problem in ABAQUS/Explicit solver using Cohesive elements?

I had a problem for so long. I could easily delete elements in ABAQUS implicit solver but I needed to use VUMAT so I had to have Explicit solution but the element did not disappear for so long. I...

23 July 2024 10,032 0 View

How can we conduct DFT for solutions or mixtures ?

Can we conduct DFT studies for Ionic Liquids with Amines at various concentrations? If so, how can we proceed with these studies? Additionally, what parameters, besides IR, NMR, and HOMO-LUMO, can...

18 July 2024 319 1 View

Has anyone tried freeze flow samples in -80C freezer or liquid nitrogen before processing?

Our lab has some radioactive cell samples that need to be kept frozen for at least 30 days before flow analysis. For some reason, the samples stored in liquid nitrogen did not perform as well as...

15 July 2024 9,975 1 View