How to sample data to increase presence of solar panels in the images?

I am working on creating deep neural network on geospatial dataset and wanted to know how to do the sampling so that I can increase the presence of solar panels in the images. I cannot use entire...

25 February 2021 3,936 6 View

Is it ok if in measurement model one of the construct having less AVE than 0.5?

In measurement model, one of the construct having AVE 0.4 but the composite reliability is 1 and Chi square = 1.099, GFI = 0.995, CFI = 0.997, RMSEA = 0.022. So, is it OK to go ahead in SEM.

17 July 2020 7,088 4 View

Relative telomere length calculation with Ct values?

10 May 2020 7,398 2 View

In empirical research can we present two different framework?

In SEM, can we present two different models, one bases on theoretical base and other for hypothesis testing? OR In one model we have to present model fit and hypothesis?

03 May 2020 3,441 5 View

How to prepare inoculum for aspergillus sp. for BMD testing?

we do not have UV-Vis spectrophotometer to adjust OD at 530 nm which is desirable for inoculum preparation of non dermatophyte. Is there any alternative method such as Barium chloride turbidity...

21 February 2020 3,975 2 View

Which wavelet transform would be better to use for image classification?

I am trying to use wavelet transform as part of pooling operation in Convolutional Neural Network for Facial emotion classification.As part of this I tried with simple Haar wavelet but it doesn't...

05 February 2020 583 6 View

Which are the perfect hardware platforms to compute ML-based inference at the network edge?

Edge Computing, IoT, Decentralized Machine Learning, Edge Gateways

12 October 2019 9,940 2 View

What are relevant theories that might help me to understand how people value urban open spaces?

Apart from economic values of urban spaces measured using CV and HP, there are other social and ecological benefits offered by urban open spaces. I want to understand whether urban residents...

06 September 2019 278 9 View

How to do expert based classification?

for generating the land use land cover

14 February 2019 9,582 3 View

How to use visco-elastic and visco-plastic material properties for polymer in ANSYS?

In ANSYS, how to model temperature dependent polymer characteristics? I mean to say which visco-elastic material properties are important in terms of Ansys? also which visco-plastic material...

28 December 2017 7,046 7 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View

How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials?

Hi, all! How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials? I have not find the choice for explicit element in Abaqus CAE. I am wondering whether it is possible...

25 February 2021 9,936 2 View

Is it possible to do optimization for a submodel in Abaqus?

I'm trying to run an optimization in Abaqus for a submodel with no luck, jobs are not being create for submission. Is this even possible? or is Abaqus limited to do Opt. for the model itself...

24 February 2021 4,908 5 View