Hi,
I have acceleration data from Arduino with DXL335 accelerometer and I want to get the displacement plot.
How can I do that?
Kind Regards
See a text on numerical analysis. You will find various methods for numerical integration.
https://www.quora.com/How-can-I-calculate-the-displacement-from-acceleration-time-graph
I am required to learn about Flyback converters and I got stuck not knowing to full design of the power supply flyback converter Based USB Charger Model using Simulink, especially the design model...
25 February 2021 5,946 2 View
Hi, How to install the rubber or friction isolator in the 7th storey in SAP2000?
03 February 2021 8,619 4 View
Hi, I have acceleration data from Arduino with DXL335 accelerometer and I want to get the displacement plot. How can I do that? Kind Regards
18 January 2021 2,713 3 View
Hello, I want to measure the displacement and period of a 3D building structure that I have constructed in the lab. How can I measure there parameters? What equipment I need? From where I can get...
10 January 2021 9,735 1 View
I want to find data about oil viscosity, water in oil, metallic wear debris particles for condition monitoring for electromechanical systems. The data should be monitored by online sensors...
23 April 2019 3,096 7 View
Hi, I want to export displacement time history to Excel. In SAP2000 they just give me the graph dirctly, I want the initial data Thanks Rakan
18 March 2019 8,027 1 View
I got confused between these two load combinations: 1.2DL+1.0LL+1.0E 1.2DL+0.5LL+1.0E I am doing Time history, response spectrum and push over analysis on RCC frame using SAP2000. Many thanks
12 March 2019 4,808 0 View
Hello I want to check my results against the UBC or IBC codes I got story displacements from SAP2000. I found two equations in UBC 1997 but they were for story drift, I want the equation of the...
10 March 2019 8,351 5 View
Hi I am studying the effectiveness of shear walls as seismic retrofitting technique. I modeled two 21 story frames, first one without shear walls, and the second with shear walls. After carrying...
06 March 2019 6,630 4 View
I have modeled two frames on SAP2000 and only different is the number of stories. First on is 3 stories and the second is 21 stories. Surprisingly, the drift of first model was 0.1m and for the 21...
05 March 2019 2,903 3 View
I have identified many solutions. I need suggestion from somebody with application experience of this topic to identify the most reliable and robust procedure.
21 July 2024 3,465 5 View
hi, I am doing a risk analysis of a cylindrical fuselage with windows. I have applied contact interactions between the different parts, and I have applied a unit value load to a reference point,...
20 July 2024 647 2 View
I am simulating interlocking / dry stacked masonry in Abaqus. I am using a friction coefficient of 0.6 for my model as it is stated in the previous research as well as in the base paper. The...
16 July 2024 5,047 0 View
Dear All, I am trying to define the dispersion curves of a periodic unit cell in COMSOL Multiphysics with prescribed displacements. I am using two separate studies: - Study 1: Stationary, with...
13 July 2024 7,855 1 View
The system matrix has 172 negative eigenvalues. Displacement increment for contact is too big. Displacement increment for contact is too big. The strain increment has exceeded fifty times the...
05 July 2024 3,839 2 View
We are using Vicon Blue trident IMUs for motion analysis. Nexus is used to stream data from IMUs currently, which are giving accelerometer, gyro, magnetometer and global angles. These data are...
04 July 2024 1,130 0 View
i have attached my model and i have used point based mesh independent fastener using attachment points and type of connector is basic cartesian but this is not working as i apply displacement on...
02 July 2024 6,293 0 View
Dear Members of ResearchGate, I hope you are doing well. I have been retrofitting using the ASCE 41 2017 standard. In it, I have two basic doubts. 1. The target displacement as per clause...
13 June 2024 2,773 0 View
In my new research, about TiAlN thin films, i constantly use the word "shift". I would like to know if i can write "displacement" as a synonym, with the intention to not repeat the words.
02 June 2024 9,694 4 View
Sample displacement in microns is found under the "Sample Parameters" item in the menu tree. Should this be refined at all during Le Bail refinement?
02 June 2024 663 0 View