I got confused between these two load combinations:
1.2DL+1.0LL+1.0E
1.2DL+0.5LL+1.0E
I am doing Time history, response spectrum and push over analysis on RCC frame using SAP2000.
Many thanks
I am required to learn about Flyback converters and I got stuck not knowing to full design of the power supply flyback converter Based USB Charger Model using Simulink, especially the design model...
25 February 2021 5,946 2 View
Hi, How to install the rubber or friction isolator in the 7th storey in SAP2000?
03 February 2021 8,619 4 View
Hi, I have acceleration data from Arduino with DXL335 accelerometer and I want to get the displacement plot. How can I do that? Kind Regards
18 January 2021 2,713 3 View
Hello, I want to measure the displacement and period of a 3D building structure that I have constructed in the lab. How can I measure there parameters? What equipment I need? From where I can get...
10 January 2021 9,735 1 View
I want to find data about oil viscosity, water in oil, metallic wear debris particles for condition monitoring for electromechanical systems. The data should be monitored by online sensors...
23 April 2019 3,096 7 View
Hi, I want to export displacement time history to Excel. In SAP2000 they just give me the graph dirctly, I want the initial data Thanks Rakan
18 March 2019 8,027 1 View
Hello I want to check my results against the UBC or IBC codes I got story displacements from SAP2000. I found two equations in UBC 1997 but they were for story drift, I want the equation of the...
10 March 2019 8,351 5 View
Hi I am studying the effectiveness of shear walls as seismic retrofitting technique. I modeled two 21 story frames, first one without shear walls, and the second with shear walls. After carrying...
06 March 2019 6,630 4 View
I have modeled two frames on SAP2000 and only different is the number of stories. First on is 3 stories and the second is 21 stories. Surprisingly, the drift of first model was 0.1m and for the 21...
05 March 2019 2,903 3 View
I did run analysis for: * Dead * Live * Modal * TH I want to compare the displacement before and after shear walls. which displacement I should compare? from which mode shape? Surprisingly, for...
01 March 2019 8,814 3 View
I have already collected seismic data and need to analyse them. Please assist with the software that can also analyse the Peak Ground ACCERATION (PGA).
10 August 2024 4,839 0 View
I haven't seen one in a while so I wondered if that journal prohibits that form of redistriibution.
04 August 2024 5,137 3 View
i am facing the difficulty to find the right and latest topic for my thesis. i searched and read hundreds of articles but i couldn't find the right one. what can i do I'm really confused.
02 August 2024 1,323 8 View
In hirshfeld surface calculation i did not find any red spot in hirshfeld surface, is it ok for research article to write?
28 July 2024 2,988 0 View
I have used 30 years of daily data, but the model is not able to optimize, getting just 0.57 in NSE and R2. when I reduced the data to 20 years in daily time frame I got 0.73 in NSE, R2 for both...
22 July 2024 669 0 View
A diachronic study
21 July 2024 989 1 View
I am working on scale development in behavioral finance by undertaking a mixed-method approach using the exploratory sequential design. The phenomenon has diverse meanings in existing literature...
20 July 2024 9,153 11 View
I synthesize silver nanoparticles ,and reserve it in water. Then, when I sonicate it some minutes or longer ,it couldn't be dispersed, most of them aggregate .Otherwise ,when I sonicate several...
09 July 2024 7,335 0 View
I seem to get confused by these two terms - Data Analyst and Business Analyst. What is the main difference between these two people?
04 July 2024 8,587 2 View
It seems that since 2012 Rio +20 Conference, the world has been moving away from science based perfect market thinking, a moved that apparently has been helped by the confusion created by the 2012...
02 July 2024 4,530 4 View