Where can I find these two papers?

14 January 2021 1,572 3 View

After CRISPR and single-colony picking, cells reverted to WT?

Hi guys: I have been doing CRISPR knock-in and knock-out and one seemingly impossible scenario keeps happening. In the CRISPR knock-in attempt I tried to add a tag on a gene of interest, so I...

07 January 2021 190 3 View

Where can I buy Agilent software?

Hello. I have old agilent instrument, 6340 with 1100series HPLC, LC-Ion trap MS. We have software for LC, chemstation, but, not for MS. I asked Agilent korea if I can buy some software, and they...

05 January 2021 1,970 3 View

Is there any ingredient I an add into formula to slow down gas generation from Vitamin C?

I know Vitamin C is unstable and tends to be oxidized quickly. The problem here is I made a Vitamin C beverage at pH 4-5, and it starts to generate gas in the packaging, especially at high...

13 December 2020 6,055 1 View

Why use STOP solution in ELISA?

At the last step for data analysis, we always use a STOP solution to stop the TMB oxidized by HRP. Why do we have to stop the reaction? Couldn't we measure the color wavelength of...

17 November 2020 5,177 3 View

Why case-controlled study is more bias prone than cohort study?

I noticed from several articles saying that case-controlled study is more bias prone than cohort study (in the context of cancer early detection using molecular marker). I spent sometime to try to...

17 November 2020 1,878 4 View

How to perform statistic analysis for age range between two cohorts?

Hi, I was reading the paper (MicroRNA Expression, Survival, and Response to Interferon in... ). In Table 1, I'm wondering how did the authors calculate a p-value of 0.29 for Age? The age in Table...

20 October 2020 2,276 5 View

Is RNALater (Qiagen) or Nucleoprotect RNA (Macherey-Nagel) compatible with High Pure Viral Nucleic Acid Extraction Kit?

I am planning to preserve fresh bat guano in either RNALater or Nucleoprotect RNA but my lab has an excess of High Pure Viral Nucleic Acid Extraction Kits. Any idea if both reagents are compatible...

14 October 2020 2,848 2 View

Hi Dear, Could someone figure the pH out?

There are two Triz-base solutions, the pH of solution #1 is 6.85, the pH of solution #2 is 9.97. What is the pH after mixing the same volume (50 ml) solution together. Please figure it out step...

29 September 2020 1,741 6 View

Is standard deviation of residuals of Markov switching GARCH model regime specific?

I'm using MSGARCH package in R. By return_data/Volatility(fit.model), I get the residuals. When I calculate the standard deviation of the residuals, it turns out that it's close to 1 for all...

14 August 2020 3,132 6 View

Is stone a sustainable material? Is it a sustainable approach to use natural stone waste in architecture?

I'm designing a zero-waste restaurant and considering using marble waste to make some tables and a bar countertop. My clients think it's not "sustainable enough" and I would like to have more...

01 March 2021 4,326 7 View

Microstrip antenna design tutorial of HFSS 3D layout module ?

I have designed a 24 GHz rectangular antenna on HFSS 3D model and got desired results while desing the same antenna with same dimensions I am getting resonance frequency at 27 GHz I am...

28 February 2021 4,426 2 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

What should a smart water system look like?

Our team is designing a smart water C&C dashboard for a smart city initiative. As we look into the current smart water system landscape, we couldn't reconcile to a definitive solution that...

16 February 2021 1,094 3 View

Why the battery connected on the load side for storing purpose is taking the volatge /current at whatever rating it is given in matlab simulation?

I am designing a DAB DC DC Converter and when I am connecting a battery block in Matlab and fix its specification lets say 350 V and 25 A, when I am giving input as 600V, Battery would charge to...

11 February 2021 3,110 1 View

Grid connected inverter using virtual synchronous machine?

Hi everybody, currently, I am working on the grid-connected inverter. I want to make my grid-connected PV system a PLL-less system. I have studied some reachers are implementing a virtual...

07 February 2021 6,078 2 View

What are the things you should keep in mind while designing a controller for a quadrotor and want to implement it on hardware (via arducopter) ?

I am designing a flight controller for a quadrotor. At first I am designing a nested/cascaded controller consisting of only proportional controllers Kp . Now, if i tune the rate controller for 10...

03 February 2021 5,001 3 View

How accurate is the shear modulus measured using PROCEQ DPC transducer of 40kHZ frequency on 100mm concrete cube specimen?

It is required to evaluate shear modulus of concrete cube specimen of 100mm size. Since the diameter of DPC transducer is around 84mm, I would like to know whether it can give reliable shear wave...

02 February 2021 1,052 3 View

Can't run my IPMSM drive system with DC-supply higher than 125 V. Have anyone had similar problem?

Hey, I try to run my 4 pole IPMSM with PWSVM and use a typical controller with PI-controller with a current loop and speed loop. When I run my system with DC-supply 100 V with a steady-state speed...

28 January 2021 7,354 8 View

Abaqus, how can I add a composite layup to a complex shape?

I am designing a knee simulation focusing on the meniscus. I want to add different material layers to the meniscus. I have tried to add composite layup to the menisci in a uniform way but the...

27 January 2021 4,998 1 View