What could be the possible reason for lack of Mtb protein expression cloned in pET28a even after induction ?

12 December 2020 2,584 8 View

Why the IT services companies (based in India) are mainly patenting only at the USPTO?

Please suggest some papers/reports on the changes in the policy with respect to patenting of computer software in India. Does it have any implications as to why the IT services companies (mostly...

12 November 2020 8,351 1 View

Can I combine data from two separate fluorometeic experiments?

I performed a fluorometric experiment with two different cell lines. I had four conditions per experiment, and four "sub-conditions" per condition, wherein I add three different chemicals (the...

08 November 2020 5,113 3 View

Can i use surfactant C-TAB in extraction and detection of the aminaphthalene sulfonates by HPLC technique?

In the detection of Aminonaphthalene sulfonates the quaternary ammonium salts like Tetrabutyl ammonium bromide ,Triethyl ammonium acetates are used so the C-TAB being an quarternary ammonium...

21 September 2020 9,636 1 View

Please suggest some good quality and free journal with very short response time for MEMS, piezoelectric energy harvester research?

Please suggest some good quality and free journal with very short response time for MEMS, piezoelectric energy harvester research?

27 August 2020 994 4 View

What is the critical chloride concentration for concrete made of GGBS and for concrete made with Silica fume ? Is it 0.5% ?

Ccrit or Cth values for concrete made with different mineral admixtures

21 July 2020 7,301 2 View

Objective function for Pulp library in python?

How do we define objective functions while doing optimization using Pulp in Python. We have defined Prediction models separately. Next step is to bring objective functions from prediction models...

06 July 2020 9,256 3 View

How i can dry Metal Nano crystals ?

freeze-drying is recommended for nanocrystals drying but other than this technique direct heat is useful to Metal Nano crytals

17 June 2020 1,238 3 View

I need to predict the time when a physical test on a machine will fail. Which time series forecast/ machine learning method should I use?

There are 2 columns: time(in seconds), amplitude of wave. I need to predict when the test may fail and we can observe a crack on the machine based on the amplitude. I do not know the...

30 May 2020 7,594 13 View

IDT or Geneart, which is best for full lenght gene synthesis?

Did anyone got full lenght genes synthesized from both IDT and Geneart and which one will be the best in terms of pricing, post purchase support and delivery speed. Preferably in India but the...

14 May 2020 942 2 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View

PUC19 as a transfer plasmid for lentiviral delivery?

Hello, Is it possible to use pUC19 as a transfer vector to be packed in using the second generation viral particles packaging system( pMD2.G; psPAX2 plasmids)? As far as I understand it there is...

28 February 2021 4,868 2 View

How to calculate Z (the number of molecules in a unit cell) for calculating theoretical density?

I am trying to calculate the theoretical density of my ceramics materials. I use the formula below to calculate the theoretical density: Theoretical density = (Molecular weight x No. of molecules...

24 February 2021 3,823 2 View

How to properly calculate the fluid solid heat transfer between polypropylene matrix and glass fiber in a porous medium?

I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium

24 February 2021 1,915 1 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

Model Volume fraction and magnetic field applications of nanofluids in ANSYS?

Hi I am working recently on a project where I have to study how the thermal properties or heat transfer enhancement of nanofluids as the volume fraction changes, or if a magnetic field is applied...

22 February 2021 961 2 View

How can I plot surface potential vs Gate voltage in Sentaurus TCAD?

Currently, I am working on a project in Sentaurus TCAD for which I required the plot of Surface Potential Vs Gate Voltage. Can anyone help me finding the simplest way or a different procedure for...

18 February 2021 1,213 2 View

What is the reason film thickness increased?

what is the reason film thickness increased when increased doping concentrations give some reasons The measured film thickness is 156, 282, 394, 548 and 681 nm for 0, 1.5, 2.5, 3.5, and 4.5 wt....

17 February 2021 8,987 5 View