Resistance mechanisms- MRSA?

I need to describe resistance mechanism of MRSA and would appriciate if any could recommend an article (relatively new review/summary)?

02 March 2020 1,308 2 View

Is anyone familiar with a MODBUS-RTU authetication research?

MODBUS-RTU is a serial protocol very common in the industrial world, the protocol is not secure and doesn't have any build-in authentication mechanism, I'm looking for research projects that try...

16 July 2019 9,046 3 View

What level of bacteria/yeast classification is possible using SEM?

I am working to use SEM to image bacteria/yeast in lichens to find where they live within lichens. We have images of bacteria as of now but it seams that without ultra-structural analysis higher...

31 January 2019 686 1 View

How to obtain uniform sheets of graphene by Langmuir-Blodgett deposition?

Hello everyone! I am going to start depositing graphene using Langmuir-Blodgett technique, and I would like to know what is the best solution to start with? What kind of graphene and organic...

16 May 2017 640 1 View

Is it possible to perform a punching test in a steel wire mesh in ANSYS with two different Young Modulus (E)?

08 July 2015 4,354 5 View

What are the implications of nihilism as a historical - philosophical movement in contemporary culture ?

Nihilism theme is fundamental for understanding the works of Nietzsche and Heidegger. At the same time , the influence of nihilistic concepts in contemporary thought has become an undeniable...

12 March 2015 6,593 17 View

Do you have a self-report measure of perceived racial discrimination?

16 October 2014 7,382 5 View

Is there any way that I can measure the solubility of CO2 in a sodium glycinate solution without the use of non-standard lab equipment?

I'm attempting to measure the solubility of CO2 in a solution of sodium glycinate but the only methods I can find in literature rely heavily on the use of VLE cells and custom apparatuses. Is...

01 January 1970 9,863 2 View

Adherance of Polyaniline coating over stainless steel?

Is the electropolymerisation of polyaniline coating over stainless steel (SS) via Cyclic voltammetry technique is really adherant? Else how to improve the adhesion of the coating, whether any...

01 March 2021 8,220 2 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

How to immerse bricks in wax ( for coating ) ?

Do we immerse the bricks horizontally or vertically ? #bricks#waterproofingsurface#civil#engeenering#chemicalengineering#wax#parafinwax

28 February 2021 6,685 2 View

For gelatin coating for culturing HUVEC.Should the gelatin be made in sterile water or PBS? Do I need to autoclave the gelatin soln after making it ?

I want to use 0.1% gelatin. Should that be made in PBS or sterile water? Should I autoclave the gelatin soln after making it in water/PBS?

28 February 2021 274 2 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

What pH condition required to coat APTES on silica coated Fe3O4?

It's a hydrolysis reaction, which may produce by either acid or base-catalyzed reaction. so can anybody help me with this, which condition is suitable for this reaction?

26 February 2021 1,760 8 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

What is the best surface to culture cells isolated from a skin biopsy?

Hello, recently I am having some difficulties with maintaining the cell culture of primary cells isolated from a skin biopsy (normal and malignant). The coating of culture plates with Matrigel (a...

26 February 2021 6,151 2 View

Unknown debris sheets observed in cell culture flasks?

Hi, We culture neural progenitor cells in T175 culture flasks coated with PLO-Laminin. We have successfully grown these cells with our protocol for months. Recently, we observed large sheets...

25 February 2021 3,443 4 View