How much time journal of Materials processing and technology takes to publish a paper?

More Shivraj SINGH Kasana's questions See All

What microstructural and physical changes will happen if high hardenability steel sample after quenching is kept for self aging for six months?

To study the effect of self aging in low alloy medium carbon steels and high chromium air hardening martensitic stainless steels, various steel grade samples are under study in my research...

06 July 2019 6,828 7 View

How we can determine critical temperatures like ac1,ac3,Ms Mf and liquidus temperature of a steel alloy by thermo mechanical simulator?

In my experimental alloy I want to calculate the actual critical temperatures of alloy steel like ac1.ac3.Bs. Bf, Ms,Mf,liquidus and solidus temperature by TMS GLEEBLE 3800.This will help me in...

04 May 2018 2,386 8 View

Upto what minimum grain diameter we can achieve by severe plastic deformation in ultra high strength steels?

I wish to utilize all possible strengthening mechanism in developing a unique ultra high strength nano bainitic steel

04 May 2018 8,193 2 View

How to prevent microstructural banding in medium carbon nickel chrome moly low alloy steels?

Severe microstructural banding is observed in HSLA nickel ,chrome moly steel rolled bars which is not removed by hardening and tempering. and results in poor high cycle fatigue properties.This is...

03 April 2018 1,956 1 View

In which countries people celebrate festival of colours called HOLI like in India?

Holi the festival of playing with colours with each other is played in India .BARSANA a plce near Mathura is famous for Lath maar holi from radha-krishna times.HAPPY HOLI TO all fellow researchers...

02 March 2018 6,080 0 View

We are using HHA steel plate with hard armor and soft armor panels to resist ballistic test by hard steel core projectile can someone tell is it ok?

In construction of bullet proof jacket 600 BHN quenched and tempered low alloy UHSS steel sheet of 3mm thickness is used in strike face followed by HAP and SAP made by high density polyethelene...

01 February 2018 7,797 0 View

If warm bending of high hardness armor sheets are bended ,can some body tell how much time plates should be heated before warm bending?

Required for my project

31 December 2017 9,912 2 View

When calculating Ms and Bs temperature of an hypereutectoid low alloy steel Ifound that Ms and Bf temperatures are different why so?

In absence of dilatometer and other facilities I wish to estimate my heat treatment temperature by emperical formulae available but find difference of about 84 deg.C in Bf and Ms,what should Ido?

31 December 2017 2,788 0 View

How we can improve weld properties and reduce HAZ in welding of high hardness armor steel plates?

Since fabrication by bending and welding is required in construction of armor protection structures made from high hardness ultra high strength armor steels a thorough understanding of these...

31 December 2017 3,472 4 View

Can I publish my paper published in research gate in any other journal?

I wish to know to maintain ethics needed for publishing the research papers.

31 December 2017 5,769 1 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Anyone plz suggest relevant topic for research in image processing+Deep learning.?

I have selected brain tumor images ...but now found that already lots of research done n this topic.

03 March 2021 5,774 3 View

Do we need to write protocol for a second study of a systematic review that has been registered and published?

I have conducted and published a systematic review and meta-analysis research with the topic related to public health and health pomotion (protocol was registed in PROSPERO). Now we want to...

03 March 2021 8,920 3 View

How to increase a model accuracy ?

dear community, my model is based feature extraction from non stationary signals using discrete Wavelet Transform and then using statistical features then machine learning classifiers in order to...

03 March 2021 6,994 5 View

How to upload pdf of my articles published?

03 March 2021 2,183 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Image Processing and classification using keras/Tensorflow?

Do you have some recommendations approaches on Image processing and classification of plant diseases using TensorFlow/Keras?

02 March 2021 1,493 4 View

Dr Thoguluva Raghavan Vijayaram

one year

Ebenezer Jacob Dhas D.S.

https://journalinsights.elsevier.com/journals/0924-0136/review_speed

https://journalinsights.elsevier.com/journals/0924-0136/oapt

https://journalinsights.elsevier.com/journals/0924-0136/editorial_time

Sir, It depends upon reviewers, and the handling associate editor.