What microstructural and physical changes will happen if high hardenability steel sample after quenching is kept for self aging for six months?

To study the effect of self aging in low alloy medium carbon steels and high chromium air hardening martensitic stainless steels, various steel grade samples are under study in my research...

06 July 2019 6,828 7 View

How we can determine critical temperatures like ac1,ac3,Ms Mf and liquidus temperature of a steel alloy by thermo mechanical simulator?

In my experimental alloy I want to calculate the actual critical temperatures of alloy steel like ac1.ac3.Bs. Bf, Ms,Mf,liquidus and solidus temperature by TMS GLEEBLE 3800.This will help me in...

04 May 2018 2,386 8 View

Upto what minimum grain diameter we can achieve by severe plastic deformation in ultra high strength steels?

I wish to utilize all possible strengthening mechanism in developing a unique ultra high strength nano bainitic steel

04 May 2018 8,193 2 View

How much time journal of Materials processing and technology takes to publish a paper?

Is is about publishing a paper in suitable journals

03 April 2018 2,013 2 View

How to prevent microstructural banding in medium carbon nickel chrome moly low alloy steels?

Severe microstructural banding is observed in HSLA nickel ,chrome moly steel rolled bars which is not removed by hardening and tempering. and results in poor high cycle fatigue properties.This is...

03 April 2018 1,956 1 View

In which countries people celebrate festival of colours called HOLI like in India?

Holi the festival of playing with colours with each other is played in India .BARSANA a plce near Mathura is famous for Lath maar holi from radha-krishna times.HAPPY HOLI TO all fellow researchers...

02 March 2018 6,080 0 View

We are using HHA steel plate with hard armor and soft armor panels to resist ballistic test by hard steel core projectile can someone tell is it ok?

In construction of bullet proof jacket 600 BHN quenched and tempered low alloy UHSS steel sheet of 3mm thickness is used in strike face followed by HAP and SAP made by high density polyethelene...

01 February 2018 7,797 0 View

If warm bending of high hardness armor sheets are bended ,can some body tell how much time plates should be heated before warm bending?

Required for my project

31 December 2017 9,912 2 View

When calculating Ms and Bs temperature of an hypereutectoid low alloy steel Ifound that Ms and Bf temperatures are different why so?

In absence of dilatometer and other facilities I wish to estimate my heat treatment temperature by emperical formulae available but find difference of about 84 deg.C in Bf and Ms,what should Ido?

31 December 2017 2,788 0 View

How we can improve weld properties and reduce HAZ in welding of high hardness armor steel plates?

Since fabrication by bending and welding is required in construction of armor protection structures made from high hardness ultra high strength armor steels a thorough understanding of these...

31 December 2017 3,472 4 View

Guidelines for survey (question type) analysis?

Hi. Please tell me what guidelines should i need to follow for questionaries' type research work in India. It is not hospital based work, we are conduction basic institutional based qualitative...

03 March 2021 2,037 3 View

Do we need to write protocol for a second study of a systematic review that has been registered and published?

I have conducted and published a systematic review and meta-analysis research with the topic related to public health and health pomotion (protocol was registed in PROSPERO). Now we want to...

03 March 2021 8,920 3 View

How to upload pdf of my articles published?

How to upload pdf of my articles published?

03 March 2021 2,183 3 View

How to access MSCI KLD Stats and Sustainalytics?

Hello all, I'm currently working on my undergraduate thesis and I'm having difficulties trying to access KLD Stats and Sustainalytics because my campus Airlangga University and apparently other...

02 March 2021 8,525 1 View

Ideas for Phd's Thesis on pricing (Marketing)?

Hi everyone, I'm studying Marketing and I would like to write my PhD thesis on the topic of pricing. Any specific ideas?

02 March 2021 9,706 5 View

No title

02 March 2021 3,060 3 View

No title

02 March 2021 932 1 View

APA 7th In-Text citations with two references with three authors with the same surname, but four different author?

I have an issue with APA 7th in-text citation. II have two papers where the first three authors are the same, and the fourth is different. I am using the Mendeley desktop app, and automatically it...

02 March 2021 790 3 View

How to calculate BREQ 3 questionnaire?

how to calculate BEHAVIOURAL REGULATION IN EXERCISE QUESTIONNAIRE BREQ 3 ,which contain 24 questions and each question has 5 answers (0- Strongly disagree , 1-disagree, 2- Neither agree nor...

02 March 2021 811 3 View

Where can I find life cycle inventory or assessment of non woven materials?

Dear network, I am looking for the LCA or LCI or at least the energy balances of the non woven fabrics process for my master project, in specific for natural fibers, yet I have found...

02 March 2021 9,662 1 View